Doorlock help with 2000 galant

Home / the12volt's Install Bay / Car Security and Convenience / Doorlock help with 2000 galant (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

downsouthplaya

Member - Posts: 38

Joined: March 16, 2004

Location: Florida, United States

Posted: September 22, 2004 at 8:09 PM / IP Logged

I installed a Clifford RS 3.5 in a 2000 galant, i found my doorlock wires which are negative trigger, the alarm has a 3 pin harness with a blue, red, and green wires. Red isnt used, the blue wires when i touch the wires activates both lock and unlock, but when i hook them up to the wires they dont do anything.

The vehicle also has factory keyless entry, please help.

Search for other posts by downsouthplaya

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: September 22, 2004 at 8:21 PM / IP Logged

U may need relays to supply better Ground Pulse.

Power Lock	VIOLET ( - )	DRIVERS KICK
Power Unlock	GREEN/ RED ( - )	PANEL

Don't Learn from Others Mistakes

You Might Be the One That Knows.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: September 22, 2004 at 8:24 PM / IP Logged

POWER LOCK|purple |- |either kick panel or *1 |

| POWER UNLOCK|lt. GREEN/ red |- |either kick panel or *1

*1 The door lock wires are in a black plug behind the fuse box, above a green module.

Are these the wires you are using.

downsouthplaya

Member - Posts: 38

Joined: March 16, 2004

Location: Florida, United States

Posted: September 22, 2004 at 8:29 PM / IP Logged

swamprat323 wrote:

POWER LOCK|purple |- |either kick panel or *1 |

| POWER UNLOCK|lt. GREEN/ red |- |either kick panel or *1

*1 The door lock wires are in a black plug behind the fuse box, above a green module.

Are these the wires you are using.

im using the ones in the kick panel, with a test light to ground when i hit the wires they lock and unlock fine, but when wired to the alarm they dont do anything.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: September 22, 2004 at 8:43 PM / IP Logged

Use relays like mo12v said. See what happens

downsouthplaya

Member - Posts: 38

Joined: March 16, 2004

Location: Florida, United States

Posted: September 22, 2004 at 8:45 PM / IP Logged

how would i wire them in?

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: September 22, 2004 at 8:59 PM / IP Logged

2 SPDT Relays:

LOCK:

Pin 87 to Ground

Pin 30 to Lock

Pin 85 to Negative Lock Output from Keyless

Pin 86 to 12 volt +

Pin 87a NOT Used

UNLOCK:

Pin 87 to Ground

Pin 30 to Unlock

Pin 85 to Negative Unlock Output From Keyless

Pin 86 to 12 volt +

Pin 87a NOT Used

Don't Learn from Others Mistakes

You Might Be the One That Knows.

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: September 22, 2004 at 9:00 PM / IP Logged

P.S .......That is if U don't have pre-wired Relay sockets

Don't Learn from Others Mistakes

You Might Be the One That Knows.

downsouthplaya

Member - Posts: 38

Joined: March 16, 2004

Location: Florida, United States

Posted: September 22, 2004 at 9:03 PM / IP Logged

mo12v wrote:

2 SPDT Relays:

LOCK:

Pin 87 to Ground

Pin 30 to Lock

Pin 85 to Negative Lock Output from Keyless

Pin 86 to 12 volt +

Pin 87a NOT Used

UNLOCK:

Pin 87 to Ground

Pin 30 to Unlock

Pin 85 to Negative Unlock Output From Keyless

Pin 86 to 12 volt +

Pin 87a NOT Used

the lock outputs from keyless are the wires in kickpanel right?

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: September 22, 2004 at 9:07 PM / IP Logged

( the alarm has a 3 pin harness with a blue, red, and green wires. Red isnt used, the blue wires when i touch the wires activates both lock and unlock, but when i hook them up to the wires they dont do anything.)

BLUE would be Unlock Pin 85 2nd Relay

GREEN would be Lock Pin 85 1st Relay

Red would be for Pin 86 on both Relays

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.