99 Jeep Viper 791

Home / the12volt's Install Bay / Car Security and Convenience / 99 Jeep Viper 791 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Autosexual

Member - Posts: 47

Joined: January 31, 2004

Location: United States

Posted: September 25, 2004 at 9:05 PM / IP Logged

I am installing the Viper 791 alarm with the DEI 55C bypass module in a 99 Jeep Grand Cherokee, but I am not sure which wire the blue wire from the 555C to connects to with the 791. The directions say to connect it to the (-) through activation output of the remote start system, but which wire is that?

hagmanti

Silver - Posts: 304

Joined: September 14, 2004

Location: United States

Posted: September 25, 2004 at 10:29 PM / IP Logged

The blue wire on the remote start primary harness.

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: October 02, 2004 at 3:35 PM / IP Logged

On the XRCS (relay satellite thing) there is a 4 wire plug next to the ribbon satellite harness. This 4 wire plug has a blue, pink, purple, and orange wire in it. The blue wire is the -status/ground when running output that you will need to connect to the blue wire on your 555C.

Gus

Wherever I go, that is where I end up......

Autosexual

Member - Posts: 47

Joined: January 31, 2004

Location: United States

Posted: October 03, 2004 at 6:59 PM / IP Logged

I am trying to find the neutral safety wire in a 99 Jeep Grand Cherokee limited, can someone direct me to it?

For a bonus question, I am putting in a Viper 791 and I am using the DEI interface for the door locks but when I lock the doors I am getting the horn as well as the chirp letting me know that the alarm has been activated. Does anyone know how to eliminate the horn or tell me what I might of done wrong?

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 03, 2004 at 7:21 PM / IP Logged

I have:

BROWN / Yellow ( - )at Switch onTransmission or PCM (located on passenger rear of engine compartment)

Don't Learn from Others Mistakes

You Might Be the One That Knows.

jmr964

Copper - Posts: 70

Joined: September 02, 2004

Location: United States

Posted: October 03, 2004 at 8:33 PM / IP Logged

Regarding the horn honk go to the overhead console and go through the menu options and turn the horn off. I have a JGC that doesn't have the factory alarm so I don't know if this will be the same or not but it lets you select if you want the horn to honk when locking and unlocking the doors with the factory keyless entry. Give that a try and let me know.

Jason

Autosexual

Member - Posts: 47

Joined: January 31, 2004

Location: United States

Posted: October 21, 2004 at 9:57 PM / IP Logged

That was a verry simple solution for the horn honk thanks.

As for the neutral saftey wire I am still coming up with nothing. I do not find a BROWN / yellow at the switch. What else do you have that might get me there.

Autosexual

Member - Posts: 47

Joined: January 31, 2004

Location: United States

Posted: October 21, 2004 at 9:59 PM / IP Logged

Thanks that did the trick.

isus

Copper - Posts: 71

Joined: October 19, 2004

Location: United States

Posted: October 21, 2004 at 10:09 PM / IP Logged

Just ground the wire. That will solve the issue.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 Jeep Viper 791

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.