the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Compustar alarm sys.


Post ReplyPost New Topic
< Prev Topic Next Topic >
thousandandone 
Member - Posts: 31
Member spacespace
Joined: September 20, 2004
Location: Canada
Posted: September 26, 2004 at 6:43 PM / IP Logged  

Hi,

My Compustar CM3000 install to 91 Legend

Pin #1: ORANGE- This is the Rearm wire. It provides you with a (-) pulse when armed, after remote start and then again one second after remote start shuts down.

Pin#2: ORGANGE/WHITE- This is the Disarm wire. It provides you with a (-) pulse when disarmed and before remote start.

My question is: What do they mean?. Where do I connect this two wires to

Thank You

Autostar
Teken 
Gold - Posts: 1,492
Gold spacespace
Joined: August 04, 2002
Location: Aruba
Posted: September 26, 2004 at 7:01 PM / IP Logged  
These wires turn on-off any factory alarm system, prior and after a RS.
Regards
EVIL Teken . . .
snguyen 
Silver - Posts: 281
Silver spacespace
Joined: October 09, 2003
Location: United States
Posted: September 26, 2004 at 8:52 PM / IP Logged  
FACTORY ARM
GREEN/ YELLOW
at anti-theft module**

**THE keyless entry module and the anti-theft module are both mounted on the right side of the steering column.

-
 
FACTORY DISARM
GREEN/ red
at anti-theft module**

** The keyless entry module and the anti-theft module are both mounted on the right side of the steering column.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer