2003 Toyota Camry

Home / the12volt's Install Bay / Car Security and Convenience / 2003 Toyota Camry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

meh66

Copper - Posts: 266

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 26, 2003

Location: United States

Posted: October 01, 2004 at 8:31 AM / IP Logged

I am about to install a remote starter on 03 Camry with factory alarm. They want the remote starter to integrate with their factory alarm and also be activated via their factory remote. I have installed three alarms with remote start capabilities. I looked at crimestopper but I only see system complete alarm systems. I would greatly appreciate if anyone can give me some recommended systems and the wiring it would entail. Do I need a bypass module?

MEH66

"Car Performance and Mobile Electronic Enthusiats"

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 01, 2004 at 8:38 AM / IP Logged

Try Micro Start 2001 or OMEGA Comfort Start, Both good products & can use Factory Remotes, but will have to pulse 3 or 4 times Lock or Unlock depending on hook-up. They also come with Remotes

Don't Learn from Others Mistakes

You Might Be the One That Knows.

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: October 01, 2004 at 3:36 PM / IP Logged

Yes you would need a bypass module. You can use the PKT from bypass.com

bougiridis

Member - Posts: 4

Joined: September 29, 2004

Location: Canada

Posted: October 01, 2004 at 11:15 PM / IP Logged

You can integrate the factory alarm by finding the lock and unlock wires in the driver side kick panel that operate with the key in the door. Look for the big harness going down in front of kickpanel, you will find a blue? (-lock), also green (+parklights) and GREEN / WHITE (brakeswitch). In the harness in the bottom there is a blue / YELLOW?(-unlock) and also you might need to find the drivers doorpin RED / black? wire if the car has auto headlights. Run your (-)rearm wire to the drivers door pin wire. It is located next to unlock wire. To test these wires use the key in the door. These lock wires will also bypass the Camry's child safety lock feature. To disarm the factory alarm without unlocking the doors, run your ground when running wire to the keysense wire, don't forget to add a diode to this line, cathode facing the module.Hope i can be of some help. Jim

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Toyota Camry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.