Dynaudio 360 polarity

Home / the12volt's Install Bay / Car Audio / Dynaudio 360 polarity (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

2ndiinone

Member - Posts: 14

Joined: September 22, 2004

Posted: October 02, 2004 at 1:43 AM / IP Logged

I purchased the 3 way Dynaudio 360 set. There are no markings to which side is the positive or which side is the negative on any of the 3 speakers. There is also nothing in writing or instructions that tell this either. The only assumption I believe I can make is that the positive side is the right side of the speaker. Also I am assuming it is the right side of the speaker because there is a sticker there. The shop I bought them from is out of business so they are no help. Any help or tips is greatly appreciated.

2ndiinone

Member - Posts: 14

Joined: September 22, 2004

Posted: October 02, 2004 at 1:44 AM / IP Logged

Also both connections are the exact same size on all the speakers.

Lizardking

Copper - Posts: 184

Joined: August 23, 2004

Posted: October 02, 2004 at 2:14 AM / IP Logged

Use a 9volt battery...If the woofer pushes out that's positive. If the woofer pulls inwards that's negative...

russ lund

Copper - Posts: 188

Joined: April 07, 2004

Location: United States

Posted: October 02, 2004 at 10:56 AM / IP Logged

Alright lizard king.You have stolen my Idea I've been using for 18-19 years.

BigDog

2ndiinone

Member - Posts: 14

Joined: September 22, 2004

Posted: October 02, 2004 at 11:17 AM / IP Logged

Wow thats easy for a mid or woofer, how do I do this with a tweeter?

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: October 02, 2004 at 12:43 PM / IP Logged

Your initial assumption is correct. If there is a sticker near the terminal on one side and it is consistent on all the drivers, that is the + side.

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Dynaudio 360 polarity

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.