Need advice, diagram for 1990 Bronco

Home / the12volt's Install Bay / Car Security and Convenience / Need advice, diagram for 1990 Bronco (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: October 10, 2004 at 1:49 AM / IP Logged

http://www.wiringinstructions.com/211.htm

This is the wiring for your windows.

Ringo

Member - Posts: 13

Joined: September 28, 2004

Location: United States

Posted: October 10, 2004 at 2:10 AM / IP Logged

THANKS EVERYBODY!

1990 Ford Bronco XLT Alpine/Kenwood XM system 2 amps 5 speakers Keyless entry remote start soon to have DVD player

2001 Harley FXSTS

saleen49

Copper - Posts: 99

Joined: August 31, 2004

Location: United States

Posted: October 10, 2004 at 9:16 AM / IP Logged

On both of my two Ford trucks i got the tach from tan wire at coil on drivers side valve cover but on my Mustang i had to use an injector wire to get tach the coil wire didn't give off a strong tach for the unit,

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 10, 2004 at 10:04 AM / IP Logged

This is what I Have:

Constant 12 volts	YELLOW OR YELLOW	IGNITION SWITCH HARNESS
Ignition 12 volts	RED / LIGHT GREEN	IGNITION SWITCH HARNESS
Starter	RED / LIGHT BLUE	IGNITION SWITCH HARNESS
Dome Light	BLACK/ LIGHT BLUE	(+) AT PIN SWITCH
Trunk Pin Switch	N/A
Parking Lamp	BROWN	(+) AT LIGHT SWITCH
Power Lock	BLACK/ ORANGE	DRIVER KICK
Power Unlock	PINK/LIGHT GREEN	PANEL

Reversal Rest At Ground Door Locks

Accessories
Window Up	D\ YEL P\ YEL/BLK @ MAIN SWITCH
Window Down	R/ RED F/ RED / BLK SWITCH
Ign Key Warn	BLACK/ PINK	(-) STEERING COLUMN HARNESS
Trunk Release	N/A
OEM Horn	YELLOW/LT GREEN OR	DK BLUE (-) W/CRUISE(+)W/O-STEER COL
Headlights	RED / YELLOW	(+) AT HEADLIGHT SWITCH
OEM Alarm Arm	N/A
OEM Alarm Disarm	N/A

Reversal Rest At Ground Power Window Circuit

Remote Start
Tach Signal	DARK GREEN/ YELLOW	('91) - TAN / YELLOW AT COIL
Ignition #2	GRAY / YELLOW	IGNITION SWITCH HARNESS
Ignition #3	N/A
Accessory	BLACK/ LIGHT GREEN	IGNITION SWITCH HARNESS
Neutral Safety	NOT GROUNDING TYPE -	OEM SWITCH OPENS STARTER CIRCUIT
Brake Light	RED / LIGHT GREEN	(+) AT SWITCH ABOVE BRAKE PEDAL
Reverse Light	BLACK/ PINK	GEAR SELECT SWITCH
Rear Window Defrost

SPEAKERS
Driver		Passenger		Size	Location
ORANGE / GREEN	(+)	WHITE/ GREEN	Front	5 1/4"	DOORS
BLACK/ WHITE	(-)	BLACK/ WHITE
PINK/GREEN	(+)	PINK/BLUE	Rear	6 X 8"	REAR SIDE PANELS
BLUE/ORANGE	(-)	GREEN/ ORANGE

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Ringo

Member - Posts: 13

Joined: September 28, 2004

Location: United States

Posted: October 10, 2004 at 11:15 AM / IP Logged

I saw this on one of the replies - "Immobilizer Bypass Module: Required: No Type: N/A Part #: N/A "

What is this? Do I actually need this? Is it part of the kit?

Is there anything else that I need that may not be in the kit?

Thanks again, Ringo

1990 Ford Bronco XLT Alpine/Kenwood XM system 2 amps 5 speakers Keyless entry remote start soon to have DVD player

2001 Harley FXSTS

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: October 10, 2004 at 4:51 PM / IP Logged

Your model year does not have any sort of alarm system. That is what it means.

Regards

EVIL Teken . . .

Ringo

Member - Posts: 13

Joined: September 28, 2004

Location: United States

Posted: October 10, 2004 at 6:45 PM / IP Logged

Teken wrote:

Your model year does not have any sort of alarm system. That is what it means.

Regards

EVIL Teken . . .

OK so I do not need one, correct?

Thanks again everybody. I'll bet that you are glad that you are not in my shoes!

But I will get it done. It might take ten times longer than it takes you guys, but I will get it done, and then I will be pretty good at installing by the time I finish it.

One more question - I see the diagrams for illuminated entry. Does my alarm need to specify "illuminated entry" or can I make it work with a relay or something? I'd like to have illuminated entry.

1990 Ford Bronco XLT Alpine/Kenwood XM system 2 amps 5 speakers Keyless entry remote start soon to have DVD player

2001 Harley FXSTS

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need advice, diagram for 1990 Bronco

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.