Regular cab dakota has 4 door wireing

Home / the12volt's Install Bay / Car Security and Convenience / Regular cab dakota has 4 door wireing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

killerfishes

Member - Posts: 18

Joined: September 08, 2004

Location: United States

Posted: October 16, 2004 at 12:17 PM / IP Logged

im trying to install an EVS into my 04 RC dak but the instructions say to move the pink/black wire from pin from #5 to #6 that is empty... but its not it has the blue wire for the 4 door set up. If i unplug one or the other the drivers door will not work. Do i use the 4 door install?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: October 16, 2004 at 7:15 PM / IP Logged

not sure i floow what your saying????

what info do you need?????

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

killerfishes

Member - Posts: 18

Joined: September 08, 2004

Location: United States

Posted: October 16, 2004 at 11:51 PM / IP Logged

I'll post some scans of the instructions i got. I got the mopar EVS II. its what the dealer would install if you went back to them. It says

" For 2-door Dakota only:

......... 6. Locate the 18-gauge PINK/BLACK unlock wire found in cavity #5 of the connecter. 7. Insert this wire into pin position #6 of the same connecter which is vacant."

"for 4-door Dakota and Durango only:

6. locate the 18-gauge D.Blue unlock wire found in cavity #6 7. center splice the EVS D.Blue wire in. 8. Locate the pink and black wire in cavity #5. 9. Center splice pink and black wire in."

I have a 2-door modle but I have the D.Blue wire in cavity #6 that should not be there. should i use the 4-door instructions or do i need new instructions?

killerfishes

Member - Posts: 18

Joined: September 08, 2004

Location: United States

Posted: October 17, 2004 at 12:24 AM / IP Logged

Regular cab dakota has 4 door wireing - Last Post -- posted image.

jmr964

Copper - Posts: 70

Joined: September 02, 2004

Location: United States

Posted: October 17, 2004 at 2:11 AM / IP Logged

The 2004 factory service manual shows no difference in the wiring for the CTM connector "C2" for a 2 dr versus 4 dr.

Jason

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Regular cab dakota has 4 door wireing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.