the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Eclipse SW9122


Post ReplyPost New Topic
< Prev Topic Next Topic >
Lizardking 
Copper - Posts: 184
Copper spacespace
Joined: August 23, 2004
Posted: October 16, 2004 at 7:57 PM / IP Logged  

Do these subs hit hard? What I mean about hard is if you listen to let's say Metallica will it be nice and tight sounding? Make you feel like someone is hitting you in the back of the head. I would be putting 1400watts RMS in a 1ohm load. Also what is the mounting depth of these subs?

jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: October 16, 2004 at 8:24 PM / IP Logged  
The mounting depth is failrly deep around 7 or 8 inches I believe.   What amp are you going to use to power it?    1400rms is alot of power and it will handle it very well, the sound is incredibly clean of the top 2 lines on eclipse the 9100 series, or 7100 series
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Lizardking 
Copper - Posts: 184
Copper spacespace
Joined: August 23, 2004
Posted: October 16, 2004 at 8:52 PM / IP Logged  
Do they hit hard? Do you know the mounting depth for sure?
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: October 16, 2004 at 9:00 PM / IP Logged  
yes they hit very very hard....I dont have a exact mounting depth right now, I know the aluminums are 6.5 almost exact, so I would say 7 to 8 inches depth for sure
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Lizardking 
Copper - Posts: 184
Copper spacespace
Joined: August 23, 2004
Posted: October 16, 2004 at 9:11 PM / IP Logged  

Would I be gaining anything going from my Diamond M6MarkII 12's to the Eclipse's

saranykm 
Member - Posts: 23
Member spacespace
Joined: September 30, 2004
Location: United States
Posted: October 19, 2004 at 6:06 PM / IP Logged  
lets put it this way....i have the eclipse 6300 series, two 12'' dvc's............these things rock hard! i have the eclipse 5342 power amp to it....my ears bleed. so just imagine the 9000 series are...i hit about 140 db with my subs and amps....so go figure.
gorilla
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: October 19, 2004 at 6:50 PM / IP Logged  
I ran some new 9000 series for awhile but not looking to run that much power plus I love running 4 subs, the look on peoples face when you have 4 beautiful 10's is great....We are running 2 10 inch 7100 series aluminums and hitting 144.7 on the lab just using RMS power only, We are yet to up over the rms rating to see what we do with all 4 in there
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
forbidden 
Platinum - Posts: 5,352
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: October 19, 2004 at 8:03 PM / IP Logged  

The titanium Eclipse subs pound, like a sledgehammer on your brain after a week long drinking binge. Power them properly, have the right box made and watch your poor little car vibrate to pieces.

Jeff, try a 147.7 with two sw8122 dvc in a sealed box power from an Xtant x series mono sub amp. With sq to boot.

Top Secret, I can tell you but then my wife will kill me.
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: October 19, 2004 at 8:05 PM / IP Logged  
I got one in one cubic foot, net, with the DA7232 running stereo to it. According to Eclipse this is about 2KWRMS, and this driver has never complained once. And I BEAT THE sh*tE out of this thing! Yep, they pound, and sound un-be-freaking-lievable too!
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Lizardking 
Copper - Posts: 184
Copper spacespace
Joined: August 23, 2004
Posted: October 20, 2004 at 9:58 AM / IP Logged  

Do you guys think I would be gaining anything from the Diamonds to the Eclipse's?   Doe's anyone have the mounting depth specs for Eclipse subs?

Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer