Clifford rs3.5 matrix transponder alarm

Home / the12volt's Install Bay / Car Security and Convenience / Clifford rs3.5 matrix transponder alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

webstar

Member - Posts: 17

Joined: October 03, 2004

Location: United Kingdom

Posted: October 18, 2004 at 12:56 AM / IP Logged

Any views on RS3.5 MATRIX alarm

I am thiking of installing one in the wifes MGF soft top good or bad idea, the factory alarm is useless.

difficult to install ?

i seem to have managed ok with my intellivoice iq install on my coupe (Teken take a bow) but the rs seems way more advanced.

Any advice would be more than helpful

webs

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 18, 2004 at 10:05 AM / IP Logged

it's a nice unit, you'll want to go with the 508D FDS sensor as well if it's a soft top.......

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: October 18, 2004 at 1:04 PM / IP Logged

What model year is this vehicle? I may be able to supply you with the required wiring schematic(s) for the vehicle.

If you also need the RS 3.5 installation guide please let me know, and I will leave a link here.

Also, you will find this installation easier, and more enjoyable, as the IG unit is pretty intensive in itself.

Regards

EVIL Teken . . .

webstar

Member - Posts: 17

Joined: October 03, 2004

Location: United Kingdom

Posted: October 19, 2004 at 1:05 AM / IP Logged

The car is a MG F year is December 1999.

Do you need Cliffnet wiz pro for the RSX 3.5, oh i managed to find an install guide posted but its 57 pages and looks a bit daunting will have think it all through first .

I could send the wife on holiday just in case it goes wrong.

What is the 508D FDS sensor ? is like proxy 4 sensor.

webs

webstar

Member - Posts: 17

Joined: October 03, 2004

Location: United Kingdom

Posted: October 19, 2004 at 1:12 AM / IP Logged

Nice one guys car is a December 99 MG/Rover F model or just MG F .

do i need Cliffnet wiz pro for the RS 3.5? oh i managed to find install guide posted, 57 pages looks a bit daunting may need to send the wife on vacation in case it goes wrong...

Whats the 508D FDS sensor ? is it like the proxy 4 ive got on the intelivoice iq.

webs

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: October 19, 2004 at 5:54 PM / IP Logged

DIRECTWIRE™ WIRING INFORMATION - ROVER / MGF (UK) / 1996 / Remote Start

12volts

Starter BLACK/ white ignition harness

Second Starter

Ignition BLACK / YELLOW ignition harness

Second Ignition

Third Ignition

Accessory

Second Accessory

Keysense

Power Lock pink 5wi alarm under centre console

Power Unlock orange 5wi alarm under centre console

Lock Motor

Unlock Motor

Parking Lights+ grn/wht & grn/red alarm under centre console

Parking Lights-

Hazards

Turn Signal(L)

Turn Signal(R)

Reverse Light

Door Trigger violet/white - alarm under centre console

Dome Supervision

Trunk/Hatch Pin violet/red alarm under centre console

Hood Pin

Trunk/Hatch Release

Power Sliding Door

Factory Alarm Arm

Factory Alarm Disarm

Disarm No Unlock

Tachometer BLACK/ white left plug @ instrument clust

Wait to start

Brake Wire

Parking Brake

Horn Trigger

Memory Seat 1

Memory Seat 2

Memory Seat 3

Immobilizer Bypass Module: Not Available

This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.

This is as close as I can get for you. Break out the meter to verify the rest of the circuits.

You do not need the Cliffnet Wizzard Pro, but having the proper cable and the software does enable you to do extra features which are not accessable via the valet switch. A 998 Bitwriter will also do the same thing, and does speed along the programming sequences.

With respect to the RS portion. Yes there are more wires to interface, but again, taking the proper time and preparations to have all available information and resources at hand will make it go smoothly.

The 508D FDS is like the Proxy 4, but alot less sufisticated, and reliable.

Regards

EVIL Teken . . .

webstar

Member - Posts: 17

Joined: October 03, 2004

Location: United Kingdom

Posted: October 20, 2004 at 12:46 AM / IP Logged

Thanks Teken

This will help loads

webs

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford rs3.5 matrix transponder alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.