791xv Starter/antigrind

Home / the12volt's Install Bay / Car Security and Convenience / 791xv Starter/antigrind (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

davidosand

Member - Posts: 36

Joined: August 04, 2004

Posted: October 19, 2004 at 6:19 AM / IP Logged

I already have several spare relays mounted in a neat little box and do not want to use the relay Satelite. So, if I cut the 7-wire ribbon cable and use purple wire for my new starter relay and the ORANGE / black for a relay to interrupt the starter circuit, will that work?

Back to Top

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: October 19, 2004 at 9:40 AM / IP Logged

Personnally, I would use the set up that came with the alarm, but if you have the time to troubleshoot potential problems, go for it.

Do it right the first time

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: October 19, 2004 at 10:15 AM / IP Logged

791 has built in starter kill/ antigrind on it, You just cut the starter wire and hook up the heavy gauge satalie relay pack to the starter side and the heavy gauge green wire to the key side of the starter wire. All done

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

davidosand

Member - Posts: 36

Joined: August 04, 2004

Posted: October 19, 2004 at 6:53 PM / IP Logged

If this will work, what is the h1/1 orange wire for.

Back to Top

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: October 19, 2004 at 7:10 PM / IP Logged

The Org on the primary harness is also a gnd when armed lead. You could use either. And yes you could use the purp to the relay pack to trigger a starter relay.

Back to Top

davidosand

Member - Posts: 36

Joined: August 04, 2004

Posted: October 20, 2004 at 6:58 PM / IP Logged

Thanks for the info. I have limited space in this little control box so the bulky relay satelite and wiring harness is just too much. Thanks again.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

791xv Starter/antigrind

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.