2004 Jeep Gr. Cher. Ltd. Remote Starter

So with a JDL-PK  my  factory 3 button (lock - unlock - panic) remotes would still work exactly the same. My remote would activate Memory settings for #1 and my wifes remote would activate Memory settings #2. What would I push to activate the remote starter? Or am I missig something?

Barry

The JDL is for use with aftermarket alarm or keyless entry. The JDL-PK is use with remote starter.I'm nost sure if there is a add-on system out on the market that can replicate two different user function from two separate remote FOB's aside from the OEM system. The JDL can only accommodate one setting as far as I know. Here is some more information on the JDL:

Thanks for all the information. It sounds to me like the JDL is as close as I am going to come to what I want.  How do I find an installer in my area that can competently install it?

Thanks for all the help!

Barry

Two more things. Does the LCD system need the data interface and is this remote system something I can install myself? I installed one several years ago in my 1995 Grand Cherokee.

Thanks Again

Barry

U definitely should use the DATABuss Interface, if not for install time and money, but it is far better than cutting wires or taking the doors apart.

Since U R on the Internet,

RESEARCH< RESEARCH<RESEARCH, then check locally to for installers.  Check with your Jeep Dealer Sales Manager & see if they use someone locally

Look in the installer database for an installer near you. The JDL can be purchased through us or bypasskit.com.

If your installing an alarm or remote starter, it is beneficial that you use the JDL or JDL-PK for easier integration of the keyless and remote start functions from the aftermarket system into the OEM system. This vehicle is easy to work on as long as you follow all the instructions given to you.

I have a 1995 Jeep Grand Cherokee and my infrared Keyless remote is failing. I'd like to purchase a replacement keyless entry remote.

I read in the post above about a "JDL". Where can I buy this? I also read about the databus interface. I've found some of these on the web but they are all for 1999 and newer. Is there a databus interface available for a 1995 Jeep Grand Cherokee? 

I'm looking for the easiest solution? Any suggestions will be appreciated.

Thanks,

Steve Smith

If the replacement is not infrared, I'll have to replace the receiver. I'd like to make the installation as simple as possible. Do you have  a data bus interface for a 1995 Jeep Grand Cherokee? I did not see that year offered on your website.

DATABuss Interface