Three Pulses converted to one pulse

Home / the12volt's Install Bay / Relays / Three Pulses converted to one pulse (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: November 05, 2004 at 5:40 PM / IP Logged

He requires only one pulse. He wanted it to be a combination Lock too He wanted to push Lock then Unlock then lock again to get a single pulse out of Relay #3. The first Pulse will Latch Relay 1 and switch the Positive to Relay 2 and the second Pulse will Latch Relay 2 sending the positive to relay 3 the third pulse will unlatch Relays one and 2 and send the one pulse out to the output.

I agree there should be a small delay but I haven't figured out how to do it the easy way yet.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

Search for other posts by hotwaterwizard

go2pac

Copper - Posts: 179

Joined: May 04, 2002

Location: California, United States

Posted: November 05, 2004 at 6:45 PM / IP Logged

I understand what he wants. Its just your diagram won't work correctly. You can get a pulse from your diagram if you did unlock then lock without initially starting with lock. He specifically wants lock, unlock then lock to get a pulse. With my diagram you must start with lock, then unlock, then lock. Plus even if you get your pulse output (which will be very short, not long enough to trigger most remote starts) and unlatch all the relays, the pulse from the lock will latch relay 1 again.

Karl

Pacific Accessory Corporation

Mobile Audio Interfacing Equipment

Connecting You to Your Music Since 1976

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: November 05, 2004 at 7:21 PM / IP Logged

We culd somehow add this into the Mix.

https://www.the12volt.com/relays/page5.asp#ctm

Constant to Momentary Output

The capacitor allows the coil of the relay to be energized until the capacitor stores a charge, thus de-energizing the coil. The resistor bleeds off the charge of the capacitor when positive voltage is removed from the other side of the coil. You can increase the output time by simply changing the value of the capacitor. This one will give you about a 1/2 second output.

Three Pulses converted to one pulse - Page 4 -- posted image.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

fbird08

Copper - Posts: 90

Joined: February 02, 2004

Location: United States

Posted: November 09, 2004 at 8:55 PM / IP Logged

This should work:

PS: dont mind the extra random relay I just forgot to delet it

Three Pulses converted to one pulse - Page 4 -- posted image.

Money is just paper

Power is fleeting

But your word is everything,

If your word means nothing,

You are nothing...think about it

fbird08

Copper - Posts: 90

Joined: February 02, 2004

Location: United States

Posted: November 09, 2004 at 9:03 PM / IP Logged

how do you post something out of paint?? or is it just on my computer that my diagram comes up as a little red x??

Money is just paper

Power is fleeting

But your word is everything,

If your word means nothing,

You are nothing...think about it

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: November 09, 2004 at 9:17 PM / IP Logged

BMP is not Allowed. You have to change the Format to JPEG or GIF Then post it.

If it is bigger than 30kb it won't go.

If you have trouble Converting it just Email it to me and I will Convert it and send it back to you.

hotwaterwizard@aol.com

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

fbird08

Copper - Posts: 90

Joined: February 02, 2004

Location: United States

Posted: November 09, 2004 at 10:26 PM / IP Logged

the last one was JPEG we'll try GIF this time Three Pulses converted to one pulse - Page 4 -- posted image. . Also just set the pulse relay timer for negative trigger and have it latch for a little longer than you think it will take you to hit the lock, unlock, then lock again. Again ignore the random relay

Three Pulses converted to one pulse - Page 4 -- posted image.

Money is just paper

Power is fleeting

But your word is everything,

If your word means nothing,

You are nothing...think about it

fbird08

Copper - Posts: 90

Joined: February 02, 2004

Location: United States

Posted: November 09, 2004 at 10:27 PM / IP Logged

Three Pulses converted to one pulse - Page 4 -- posted image.

Money is just paper

Power is fleeting

But your word is everything,

If your word means nothing,

You are nothing...think about it

fbird08

Copper - Posts: 90

Joined: February 02, 2004

Location: United States

Posted: November 09, 2004 at 10:29 PM / IP Logged

damn it!!! we'll see if hotwater wizard has better luck posting it

Money is just paper

Power is fleeting

But your word is everything,

If your word means nothing,

You are nothing...think about it

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: November 09, 2004 at 10:34 PM / IP Logged

TESTING

Three Pulses converted to one pulse - Page 4 -- posted image.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.