changing from 12'' to 10'' subs

Home / the12volt's Install Bay / Car Audio / changing from 12'' to 10'' subs (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: October 25, 2004 at 5:55 PM / IP Logged

or you could consider one quality sub like a jl w6v2 or eclipse aluminum, either one of these would normaly put your standard 2 10's to shame also meets to your amp well

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

wheelerdr

Copper - Posts: 337

Joined: October 25, 2004

Location: Louisiana, United States

Posted: October 25, 2004 at 5:56 PM / IP Logged

I don't know about memphis being just par. an JL audio dealer her and I have hear lots of cars at our hangout and with my memphis 12 there is only a few out there with jl audio that can beat my set up, and they have jlw6's These subs are 250 rms and 350 peak. and Im driving them with a 1000 watts, These subs laugh at that and keep on rocking. the problem is that My memphis dealer took off on us and the closes on in alaska is about 600 miles away from me. so I need something I can get online . Im going with the infinity 10" II think. I have also heard Kenwood excelon db10 are great 1200 watt max. Have you heard anything about the kenwood Subs. I have heard they are the best sounding subs. THat is from our rockford dealer.

wheelerdr

Copper - Posts: 337

Joined: October 25, 2004

Location: Louisiana, United States

Posted: October 25, 2004 at 6:02 PM / IP Logged

Im not sure about these memphis being bottom line. At out hangout we most of them use jl subs and I blow them away all night long except jlW6's That is a beast. but my subs now are 250 rms and 350 peak I drive them at 1000 watts and not a problem the subs take it and press on. the problem is that my memphis dealer is gon( He showed up and after his largest shipment of memphis products he took off with all of it and left) Memphis tech support said that they cannot find him, and they will not support another dealer in alaska! what about kenwood excelon Subs I have heard they are one of the best sounding subs ( from our rockford dealer) he would rather sale me kenwood than rockford. My amp is a kenwood excelon 1000 watt amp.

boxmaker85

Silver - Posts: 433

Joined: September 19, 2004

Location: United States

Posted: October 25, 2004 at 6:09 PM / IP Logged

The w6v2 probably won't fit under a truck seat. Mounting depth plus a few inches isn't going to happen (i think). Memphis is nice stuff. The 2 10w3v2 are good, about the same price as the kappa perfect. The JL handles a little more power and probably has some better sq. But you can get a kappa perfect off the net w/ a waranty, you can't do that w/ a JL. sucks.

wheelerdr you've got how many watts driving how many subs? If those subs had 1000 watts driving a 12 they would be fried as an egg on a tin roof. Four 12 yeah, two..... maybe. And yeah a w6v2 rips a lot of subs a new hole.

wheelerdr

Copper - Posts: 337

Joined: October 25, 2004

Location: Louisiana, United States

Posted: October 25, 2004 at 7:51 PM / IP Logged

I have a kenwood excelon 811d pushing 2 memphis dvc 12's 4+4 ohm, wired in at 1 ohm 1000Watts the subs excursion comes out so far that I had to remove the grills because the subwoofer was hitting the girlls.

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: October 25, 2004 at 8:08 PM / IP Logged

I dont see how power reference stuff would beat w6's I have never seen it done with the right box and the right amount of power, thats just me though

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

changing from 12'' to 10'' subs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.