the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Holow Tube Screwdriver ?


Post ReplyPost New Topic
< Prev Topic Next Topic >
silvercivicsir 
Copper - Posts: 400
Copper spacespace
Joined: November 21, 2003
Posted: October 28, 2004 at 12:29 AM / IP Logged  

Hi, kinda of a dumb Question, but is there a special name for the tool, that looks like a screw driver, that you use to run wire through ? ie through firewalls / Gromets ?

tbirdman74 
Copper - Posts: 164
Copper spacespace
Joined: August 22, 2003
Location: United States
Posted: October 28, 2004 at 12:04 PM / IP Logged  
The one that I have is called a Thextron tool.  Dont know if that is tool name or manufacturer name for sure, but you can get from Metra, and probably other sources as well.
If it don't fit, Force it.
If it breaks, You needed a new one anyway!
audiopro111 
Copper - Posts: 160
Copper spacespace
Joined: September 24, 2004
Location: United States
Posted: October 28, 2004 at 10:35 PM / IP Logged  

can't remember name of tool at this moment but a word of advice is don't waste your money on this tool this tool will cost u more problems in the long run or (short) this tool is known for damaging wire harnesses thru out............

TRUST ME.....  good luck finding out the name!

AudioPro111
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: October 29, 2004 at 12:31 AM / IP Logged  
Wire insertion tool
All the tool trucks usually carry them.
I have two. One that fits 10 gauge wire, and another that will fit up to 4 gauge. Useful on some cars, you just got to be careful not to stab into a bundle of wires.
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: October 29, 2004 at 1:26 AM / IP Logged  
You can find it here for 12 bucks as well.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
civicdownlow 
Member - Posts: 26
Member spacespace
Joined: August 14, 2004
Location: United States
Posted: October 29, 2004 at 7:16 PM / IP Logged  

i js cut an old power antenna up then u have multiple sizes

misterjimbo 
Silver - Posts: 535
Silver spacespace
Joined: October 11, 2003
Location: Michigan, United States
Posted: October 29, 2004 at 8:02 PM / IP Logged  
if you like havin the hole you can use a brake line that way you can cut it to lenght

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer