Clifford AG5 Smart Siren Vol probs!!

Home / the12volt's Install Bay / Car Security and Convenience / Clifford AG5 Smart Siren Vol probs!! (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

MattL

Member - Posts: 13

Joined: May 16, 2002

Location: United Kingdom

Posted: October 30, 2004 at 7:20 PM / IP Logged

Just installed a Cliffords AG5 system to my car....few probs with the factory BCM but sussed it in the end!

Anyway..when i first installed it the siren was nice and loud...know the volume seems to have dropped right off it and can hardly hear the thing....its a Smart siren.

I was wondering if the car just needed driving some more to charge the siren or if i have a siren problem or even worse a brain problem.

Anyone had any experience or seen this problem before?? Anyone know how to go about testing it all?

Matt

Back to Top

MattL

Member - Posts: 13

Joined: May 16, 2002

Location: United Kingdom

Posted: October 31, 2004 at 6:25 AM / IP Logged

no one???

Back to Top

MrStangMan

Member - Posts: 27

Joined: June 16, 2003

Location: United States

Posted: November 01, 2004 at 4:04 PM / IP Logged

Must be a Matt thing. I just installed the AG5 in my car... the first few days the alarm was LOUD, now i have no sound at all. Not sure what happened. Talked to DEI an they said give it a few more days to charge and if still nothing, it may have to be replaced. Ill let you know if i find out anything else.

Back to Top

naughtydog

Copper - Posts: 90

Joined: May 02, 2002

Location: United Kingdom

Posted: November 01, 2004 at 5:15 PM / IP Logged

The clifford sirens take about 8 hours to charge, they only charge with the ignition ON. Is it just the arm/disarm tones that are low?? - not the main siren sound when you trigger the alarm??

Naughty

Back to Top

MrStangMan

Member - Posts: 27

Joined: June 16, 2003

Location: United States

Posted: November 02, 2004 at 11:40 AM / IP Logged

The siren comes with a charge, so it works out of the box. Unless something goes wrong it shouldnt drain. I get no sound at all from the siren -- no chirps, no sound when the alarm is triggered, and i cant even get it to work through cliffnet wizzard. Ive tested the lines and connections and the siren is getting power and ground and everything else, so it seems as though it should be working.

Matt

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford AG5 Smart Siren Vol probs!!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.