the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Quick Audiobahn Component Question


Post ReplyPost New Topic
< Prev Topic Next Topic >
SMystikal 
Member - Posts: 19
Member spacespace
Joined: September 23, 2002
Location: United States
Posted: November 01, 2004 at 6:04 PM / IP Logged  
I have a set of audiobahn components. abc6003q to be exact. Anyways, looking at the wires they gave me, the tweeter wire were very short. Maybe 16 inches. Is there a reason they are that short? The component set came with crossovers also if that makes a difference. Thanks alot.
Steve
kfr01 
Gold - Posts: 2,121
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 30, 2003
Posted: November 01, 2004 at 6:23 PM / IP Logged  
Tweeter leads are often short.  Simply connect longer wire if necessary.  Read your manual and see the page called, "Installation Primer" at http://www.bcae1.com/ for more information about splicing wire together, soldering, and the like.
New Project: 2003 Pathfinder
SMystikal 
Member - Posts: 19
Member spacespace
Joined: September 23, 2002
Location: United States
Posted: November 01, 2004 at 6:39 PM / IP Logged  
I planned on using longer wire. Just wondering if there was a reason that they were given to me so short. The rest of the wires are more than long enough. Just seemed strange that they were so short unless there was a reason I didn't know about.
kfr01 
Gold - Posts: 2,121
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 30, 2003
Posted: November 01, 2004 at 6:41 PM / IP Logged  
Feel lucky, a lot of component makers don't include speaker wire.
New Project: 2003 Pathfinder
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: November 01, 2004 at 10:48 PM / IP Logged  
well most of the time the tweeter is just going to hook to the crossover and so will the woofer 5 or 6 inch driver then seprate wire will be ran to the amp or radio
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Francious70 
Silver - Posts: 629
Silver spacespace
Joined: July 26, 2004
Location: United States
Posted: November 02, 2004 at 8:58 AM / IP Logged  
The reason the wires are so short is because it's best to keep the woofer and the tweeter in close proximity of each other as to not create imaging problems.
Paul

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer