791xv Help

Home / the12volt's Install Bay / Car Security and Convenience / 791xv Help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

davidosand

Member - Posts: 36

Joined: August 04, 2004

Posted: November 03, 2004 at 7:54 PM / IP Logged

I'm using the H1/1 orange wire to activate a relay that needs to stay de-energized when it is disarmed and in remote start mode. Currently the orange wire gives an output when I go to remote start, but the remote continues to display "Disarmed" Can this be changed? I have a Bitwriter. Or, is there another output that comes on "ONLY" in the "armed" state and off at other times??

Thanks,

David

Back to Top

davidosand

Member - Posts: 36

Joined: August 04, 2004

Posted: November 03, 2004 at 10:34 PM / IP Logged

For no apparent reason the blue LED was on constantly. I couldn't seem to get any response, so with the Bitwriter I did the ZAP thing. The LED went out but I'm not sure how to re-Learn the transmitter. According to the manual, the valet button should be used. But I'm not sure I'm doing it right. I sure could use any suggestions you guys could give me.

Thanks: David

Back to Top

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: November 03, 2004 at 10:39 PM / IP Logged

Door open, ignition to "on", pres valet once, then hold. Press "lock"

Gus

Wherever I go, that is where I end up......

Back to Top

davidosand

Member - Posts: 36

Joined: August 04, 2004

Posted: November 03, 2004 at 11:37 PM / IP Logged

I have some of the buttons working now, but the LED stays on. What;s up with that?

Thanks, David

Back to Top

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: November 03, 2004 at 11:46 PM / IP Logged

you keep putting it into valet mode.

stop going ape on the buttons.

open door, lock-unlock-lock

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Back to Top

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: November 04, 2004 at 12:32 AM / IP Logged

open the door, turn the ignition on then off and press the valet button ONCE and you will be out of valet mode. repeat the steps to go back into valet mode.

MECP certified installer

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: November 04, 2004 at 12:35 AM / IP Logged

Turn "anti-grind" off in programming and the orange wire will function as you want it.

You realize you don't want to energize a relay the whole time the alarm is armed. It will kill your battery. What is its function? and how are you intending to wire it?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

791xv Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.