the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 791 Parking Lights


Post ReplyPost New Topic
< Prev Topic Next Topic >
ampere 
Member - Posts: 40
Member spacespace
Joined: October 15, 2004
Posted: November 04, 2004 at 11:31 AM / IP Logged  

I recently installed this unit in a 2004 escape. Everything works great with the exception of one little problem, and me being picky.

I've followed the instructions and re-tested everything posted from this thread:

https://www.the12volt.com/installbay/forum_posts.asp?tid=40936&KW=2004+escape

The only wire I'm suck on is the: Key Sense: BLACK/ Pink (+) @ Fusebox in driver kick - Near Top

There are probably 3 wires this color pattern and when I meter them I'm not exactly sure if I'm looking for a (+) pulse, or constant (+). If anyone knows which color connecter this wire is on, that would greatly help!

Also, I've noticed that when I lock/unlock or anything that makes the parking lights flash, it actually illuminated the parking lights and the rear taillamps. At first I thought there was a problem, then  realized, the tail lamps are indeed park of the parking light circuit! Duh! Viper 791 Parking Lights -- posted image.  If at all possible, I'd like to have JUST a yellow parking/turn signal lights illuminate and not the red tail lights as well (like how the factory FOB works). My first thought was ok no problem, I'll just use the harard lights and tap in AFTER the flasher. Well, after searching and following wires I can't seem to find the flasher... Am I just overlooking it? or is the flashing GEM/ECU controlled?

ampere 
Member - Posts: 40
Member spacespace
Joined: October 15, 2004
Posted: November 04, 2004 at 9:59 PM / IP Logged  
Well, I'll give an update for anyone who might run accross an escape in the future.
I was told that a Key Sense wire would need to be hooked up to the 556U to prevent the car from seeing 2 keys when getting in a car that has been remote started. Just for S&G I decided to try remote starting the car, getting in and putting in my key to take over WITHOUT connecting the key sense wire. Worked like a charm!! Wonder if the 556U can detect another key whereas the 555U couldn't?
No idea why it works, but contrary to what I've heard, it does! Viper 791 Parking Lights -- posted image.
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: November 05, 2004 at 9:17 AM / IP Logged  
The keysense wire is in the igniton harness. I recommend hooking it up. Its possible if you were to remote start the car with a key in the ignition that both keys would be deleted and wouldn't work anymore. Your gamble.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer