Need diagram for 2k3 Mitsubishi outlander

Home / the12volt's Install Bay / Car Security and Convenience / Need diagram for 2k3 Mitsubishi outlander (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

2k3sxt

Member - Posts: 16

Joined: August 01, 2003

Location: Michigan, United States

Posted: November 04, 2004 at 10:24 PM / IP Logged

I need the wiring diagram for a 2003 Mitsubishi outlander so I can install my old alarm in my fiance car. I searched the forums and only came up with a few wires. If someone could post a full diagram I would greatly appreciate it. Thanks in advance.

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: November 04, 2004 at 10:30 PM / IP Logged

Mitsubishi

Outlander

2003

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	BLACK/ White (+)	Ignition switch harness
Ignition #1:	Blue/Black (+)	Ignition switch harness*
Ignition #2:	Blue/Red (+)	Ignition switch harness
Ignition #3:	N/A	Ignition switch harness
Accessory:	Blue / YELLOW (+)	Ignition switch harness
Brake Light:	Blue/Orange (+)	Brake pedal switch
Tach Signal:	N/A
Parking Lights:	GREEN / WHITE (+)	Bottom of the fuse box
Headlights:
OEM Alarm Disarm:
OEM Alarm Arm:
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	*This vehicle may be equipped with a Transponder Anti-Theft System. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. See also Note #144

Mitsubishi

Outlander

2003

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	Blue/White (+)	Ignition switch harness
Starter Kill:	BLACK/ White (+)	Ignition switch harness
Ignition +12 Volts:	Blue/Black (+)	Ignition switch harness*
Dome Lights/Superv:
OEM Horn:
Power Lock:	LtGREEN/ Red (-)	White harness high in the drivers kick panel**
Power Unlock:	BROWN / Red (-)	White harness high in the drivers kick panel
Trunk Release:
Alarm Input Wire:
Notes:	** See Note #201 Negative Trigger Door Locks.

2k3sxt

Member - Posts: 16

Joined: August 01, 2003

Location: Michigan, United States

Posted: November 04, 2004 at 10:49 PM / IP Logged

Thanks for the quick reply. Do you have the info mentioned in the notes? Also when it says universal transponder bypass 2x402 what would the be the DEI equivalent? Thanks again.

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: November 05, 2004 at 12:46 PM / IP Logged

Try the bypass from bypass.com. PKU-MIT - Mitsubishi Transponder Bypass:

Transponder Bypass: RF override via induction w/ loop antenna (transponder incl. no key required)

2k3sxt

Member - Posts: 16

Joined: August 01, 2003

Location: Michigan, United States

Posted: November 05, 2004 at 2:45 PM / IP Logged

See Note #201 Negative Trigger Door Locks? I didnt see anything on a door trigger. Do you have anymore info on the triggers? Have you installed an alarm and remotestart on an outlander before? Thanks.

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: November 05, 2004 at 6:11 PM / IP Logged

All Door Trigger: Brown (-) @ White plug on front of fusebox

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need diagram for 2k3 Mitsubishi outlander

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.