wedge size

Home / the12volt's Install Bay / Car Audio / wedge size (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

blazer88

Member - Posts: 14

Joined: June 10, 2002

Location: United States

Posted: October 06, 2002 at 12:57 PM / IP Logged

I need to know the size of the front piece of mdf on a wedge enclosure that measures 35.25 wide x 14.5 high x 29.125 deep. This will be cut at a 45deg. angle top and bottom.

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: October 06, 2002 at 5:18 PM / IP Logged

WELL WHEN BUILDING BOXES THE FRONT AND BACK PEICES ARE THE BIGGEST PEICES MEANING IT YOU NEED A BOX THAT IS LIKE THIS

THE FRONT PEICE ACORDING TO YOUR MEASURMENTS SHOULD BE 35 1/2 LENGTH SIDE TO SIDE AND 14.5 HIGH TOP TO BOTTOM

YOUR SIDE PIECES SHOULD BE 13 LENGTH TOP TO BOTTOM USING 3/4 THINK MDF. TO MAKE A TOTAL OF 14.5

THE MIDDLE PIECES SHOULD BE INSIDE OF THE FRONT AND BACK PEICES EMAIL ME FOR DIAGRAM OF EXPLANATION.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

blazer88

Member - Posts: 14

Joined: June 10, 2002

Location: United States

Posted: October 06, 2002 at 8:16 PM / IP Logged

Thanx Jon, I had what I like to call a "Brain Fart" and couldn't think straight today. Thanx again for your help. Mark

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wedge size

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.