86 Mustang Install

Home / the12volt's Install Bay / Car Security and Convenience / 86 Mustang Install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

LqDFx

Copper - Posts: 69

Joined: July 10, 2004

Location: Indiana, United States

Posted: November 06, 2004 at 3:12 PM / IP Logged

Anyone install an Alarm system in an 86 Mustang before. I am having trouble getting to the parking lights wiring and I have so little room to get to any wiring under that dash! I was hoping someone would have some advise or a trick to get to the thing.

Also, my ignition is messed up. I have a momentary button that is for the starter. The key needs to be in the run position for it to start and run, but you can attemp to start the car without the key. I did not do it, it was like that when I bought the car. Can someone tell me how to wire it up to the starter kill so that the key has to be in before the switch will get power.

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: November 06, 2004 at 6:41 PM / IP Logged

The BROWN Parking Lite wire runs thru Firewall. If U can't get it at the switch, U can find it in the harness.

WHITE/ Pink wire probably is going to your Push Button for Start. Wire a Relay as :

https://www.the12volt.com/relays/page2.asp "Basic Starter Kill"

If U are not using an Alarm, ground PIN 85 and hook up PIN 86 to Red / Light Green @ Ignition switch

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

LqDFx

Copper - Posts: 69

Joined: July 10, 2004

Location: Indiana, United States

Posted: November 06, 2004 at 7:05 PM / IP Logged

So I can use the starter imoblizer in the Alarm for the switch? That way I do not have to waste another relay? I just use the one that is in the alarm right? I have a Hurricane 2 from Avaital

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

86 Mustang Install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.