the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

My first fiberglass projects


Post ReplyPost New Topic
< Prev Topic Next Topic >
1hot944 
Copper - Posts: 46
Copper spacespace
Joined: November 06, 2004
Location: Canada
Posted: January 31, 2005 at 10:42 AM / IP Logged  
Actually it is quite smooth,its just the way the resin went on that makes it look creased. We'll see what the final result shows My first fiberglass projects - Page 2 -- posted image.
In a world full of copycats, it's great to be an original!
sinisteraudio 
Member - Posts: 5
Member spacespace
Joined: January 18, 2005
Location: United States
Posted: January 31, 2005 at 12:01 PM / IP Logged  

ya but if you took your time you can get it to lay down so its just exactly the same smoothness as the outside will be . here is a pic of a box i did with a really thin coat of bondo over it

1hot944 
Copper - Posts: 46
Copper spacespace
Joined: November 06, 2004
Location: Canada
Posted: February 04, 2005 at 11:11 AM / IP Logged  

Update of progress Feb 4/05

Second coat of filler. Still a lot more sanding to do.

My first fiberglass projects - Page 2 -- posted image.

My first fiberglass projects - Page 2 -- posted image.

My first fiberglass projects - Page 2 -- posted image.

My first fiberglass projects - Page 2 -- posted image.

In a world full of copycats, it's great to be an original!
sinisteraudio 
Member - Posts: 5
Member spacespace
Joined: January 18, 2005
Location: United States
Posted: February 04, 2005 at 12:00 PM / IP Logged  

if i can see it right it looks like you just have a common chamber for all of ur speaker. right?

1hot944 
Copper - Posts: 46
Copper spacespace
Joined: November 06, 2004
Location: Canada
Posted: February 05, 2005 at 10:28 PM / IP Logged  

No, actually the subs are in a sererate enclosure from the 6x9's. I had built the sub enclosure over the previous one so the two would be seperate. Hard to see from the pictures.

If you go to my cardomain page,  http://www.cardomain.com/id/irricanian

you can see what I did.

In a world full of copycats, it's great to be an original!
realitycheck 
Silver - Posts: 751
Silver spacespace
Joined: September 09, 2004
Posted: February 07, 2005 at 7:37 AM / IP Logged  
Awesome job man, looks like you have been doing a whole lot of work.  Good job though, i'm thoroughly impressed in how its coming along.
Learning the trade one fiberglass creation at a time!
1hot944 
Copper - Posts: 46
Copper spacespace
Joined: November 06, 2004
Location: Canada
Posted: February 20, 2005 at 3:08 PM / IP Logged  

Thanks, I was hoping to get some more done but the weather has not been co-operating. I went to World of Wheels here in Calgary yesterday and took a few pics of some installs and thought i would share them. The Viper trunk with the two triangular subs had plexi covers over the amps which were lighted and had fish tank bubblers as well.

My first fiberglass projects - Page 2 -- posted image.My first fiberglass projects - Page 2 -- posted image.

My first fiberglass projects - Page 2 -- posted image.My first fiberglass projects - Page 2 -- posted image.

My first fiberglass projects - Page 2 -- posted image.My first fiberglass projects - Page 2 -- posted image.

My first fiberglass projects - Page 2 -- posted image. I hope none of the owners mind me putting up pictures of their fine work. My first fiberglass projects - Page 2 -- posted image.

In a world full of copycats, it's great to be an original!
1hot944 
Copper - Posts: 46
Copper spacespace
Joined: November 06, 2004
Location: Canada
Posted: February 23, 2005 at 9:42 PM / IP Logged  

Some update pics, I've sanded and put 1st coat of primer on. Now I am going to do a few touch ups and sand before putting on the next primer coat. I also sprayed some sound deadening material on the inside.

My first fiberglass projects - Page 2 -- posted image.My first fiberglass projects - Page 2 -- posted image.

My first fiberglass projects - Page 2 -- posted image. I just dropped my subs in to have a look . Were getting some nice weather here in Calgary so I might have some more pics by the weekend.

In a world full of copycats, it's great to be an original!
doc t 
Copper - Posts: 169
Copper spacespace
Joined: April 11, 2004
Location: South Carolina, United States
Posted: March 01, 2005 at 5:46 AM / IP Logged  
although i can't see the pics at work, i'll look when i get home,  just keep us updated.
All Bleeding stops.....eventually!
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, January 31, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer