98 Acura 2.5 TL Problem

Hi, After I install the starter into this car. Everything working: Start, Lock/Unlock. The problem is: Can't shift. Does matter what I try. Using key, using factory remote to lock/unlock, remove starter module fuse, reset car battery. Still can't shift. For the Power lock/ unlock wire, I opened the driver side switch to get the wire not using the one in wiring database My starter module is the first basic one(AS-1414SR) in this webpage: http://206.47.191.115/htmlpic.nsf/FramesetCE Need help pleaseAutostar

Make sure that your getting 12 volts on the brake wire as bobk suggests. Test with a DMMJeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

This may be obvious but check all your fuses. I know on the brand new camry's there is a 5A fuse that blows occasionally for whatever reason, even if nothing is installed in the car. This 5A fuse controls the actuator that unlocks the shifter. Money is just paper

Power is fleeting

But your word is everything,

If your word means nothing,

You are nothing...think about it