the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

OEM keyless entry Receiver location 98 GM


Post ReplyPost New Topic
< Prev Topic Next Topic >
mastiff 
Member - Posts: 6
Member spacespace
Joined: November 14, 2004
Location: United States
Posted: November 14, 2004 at 3:21 PM / IP Logged  

 

 

 

Would someone please tell me where the OEM keyless entry receiver( BCM?) is located on a 98 GMC truck I think mine has died as the remotes will not unlock/ lock the doors.

This is the last thing I need to check, all the fuses are good and the locks work from the door switches. It just died all the sudden.

 

 

Thank you

Mastiff

Take care of business or business will take care of you.
mastiff 
Member - Posts: 6
Member spacespace
Joined: November 14, 2004
Location: United States
Posted: November 14, 2004 at 3:35 PM / IP Logged  

ok dont know why the above happend but please read below

 

 

Would someone please tell me where the OEM keyless entry receiver is located on a 98 GMC truck I think mine has died as the remotes will not unlock/ lock the doors.

This is the last thing I need to check, all the fuses are good and the locks work from the door switches. It just died all the sudden.

 

 

Thank you

Mastiff

Take care of business or business will take care of you.
mastiff 
Member - Posts: 6
Member spacespace
Joined: November 14, 2004
Location: United States
Posted: November 14, 2004 at 3:36 PM / IP Logged  

Would someone please tell me where the OEM keyless entry receiver is located on a 98 GMC truck I think mine has died as the remotes will not unlock/ lock the doors.

This is the last thing I need to check, all the fuses are good and the locks work from the door switches. It just died all the sudden.

 

 

Thank you

Mastiff

Take care of business or business will take care of you.
mastiff 
Member - Posts: 6
Member spacespace
Joined: November 14, 2004
Location: United States
Posted: November 14, 2004 at 4:19 PM / IP Logged  

ok seeing how i messed up the above post

a 98 gmc reg cab truck, does it have a bcm for OEM keyless or does the keyless have a reciver?

also need the location of this magic black box please.

reason = keyless entry dead but pwr door locks still work at the door switch any help would be greatly appreciated.

Take care of business or business will take care of you.
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 14, 2004 at 6:25 PM / IP Logged  

Power LockL BLUEDRIVER KICK
Power UnlockWHITEPANEL **
** Without OEM Keyless Entry  - Reversal Rest At Ground Door Locks
  With OEM Keyless Entry  - Positive Pulse Door Locks
RKE ModuleBEHIND DRIVER DASH ABOVE AND TO THE RIGHT OF THE STEERING COLUMN.

OEM RelaysBEHIND DRIVER DASH ABOVE BRAKE PEDAL

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
mastiff 
Member - Posts: 6
Member spacespace
Joined: November 14, 2004
Location: United States
Posted: November 14, 2004 at 6:58 PM / IP Logged  
thank you, just one more question is it common for the RKE Module to go bad?
Take care of business or business will take care of you.
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 14, 2004 at 10:09 PM / IP Logged  
Not sure about common...........Anything is possible.  I would want to check your Remotes first.  Your local Alarm shop should have a frequency / signal checker to see if they are sending signal.  You might even try programming them first.
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
mastiff 
Member - Posts: 6
Member spacespace
Joined: November 14, 2004
Location: United States
Posted: November 14, 2004 at 10:33 PM / IP Logged  

this is what i have done so far.

1 checked fuses = good

2 used two differnt remotes one was a spare that came with the truck end result = nothing still not working.

i will try the reprogamming thing next

thank you for the help once again.

Take care of business or business will take care of you.
Jediknight1274 
Member - Posts: 4
Member spacespace
Joined: November 14, 2004
Location: United States
Posted: November 15, 2004 at 8:31 AM / IP Logged  
ok this might sound stupid, but make sure the batteries in your transmitter are still good, i've personally never seen one of these mods go bad.  And they are typically DEI made.
SMCinMD

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer