Remote Start/Dead Battery

BIkER1 wrote: One more thing,when I put the toaster on the battery to check the volt.The reading is jumping up and down I don't have a steady reading

There's the problem guys !!! remove the toaster from the engine bay and make sure there's no bread in there as well   Sorry, I had to do it.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

?????????live to ride

The remote starter fuses will be under the dash somewhere, there is usually 2 of them, pull them both and go to your installer monday. all the above opinions definitly hold true.. Hymer

I pull the fuses and still dead battery,they told me they checked the alternator but?I put an another battery and drove around my alternetor gage reading said it charging I stop the truck and 3 hours later I tried to started it but dead battery could it the alternator???live to ride

Well you definitly have a big draw somewhere, On older vehicls you could start the car and pull the Pos. battery post, if the car stayed running the alternator is ok, if it stalled the alt. is shot . You can try it, but I don't know if it holds true. or get into your main fuse panel with an amp meter and find what ckt. it pulling a draw. I know you will find it that way...

They put a flashing led too the model you have 5 flashing stylelive to ride

the leds wont draw that much current, i have four blue super brights and they dont kill my battery. has to be something else.gcorrea

The problem was the led.The way it was pluged he was pulling 4 ampslive to ride

Did the installer tell you that, because if he did I think he is full of sh*t. He probally did a poor job on something else and didnt want to tell you the real reason. Reason why I say this is because even if he some how "plugged it in wrong" I sont see how he possibly plugged it in so It was pulling 4 amps, and even so if it was pulling 4 amps that shouldnt kill the battery in 3 hours. There had to be something elsedouble-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

thats sad, having to lie on a poor job done.              gcorrea