lights dim

Home / the12volt's Install Bay / Car Audio / lights dim (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

Franco90

Copper - Posts: 48

Joined: February 23, 2004

Location: United States

Posted: November 26, 2004 at 8:20 PM / IP Logged

OK HERE IS WHAT I HAVE IN MY 97 TOYOTA RAV4

ALPINE CDM-7854

JCC AMP KS-AX4750

SHAUN PALMER SIGNATURE SERIES

Bridgeable 2-Channel Power Amplifier

Continuous Power (RMS) of 100W per channel into 4 ohms 20Hz-20kHz at no more than 0.08 THD

Max. Power 560W Mono

2 Ohm Stable Operation (2-8 Ohm Allowable)

Bass Boost Control

Custom build box for

Rockford Fosgate Punch Audiophile 10" woofer

VIDEO

BOSS DVD300V

7’ in flip down LCD

5’ mmobile TV

Prestige car ALARM

Back to Top

uthinkuknoaudio

Silver - Posts: 760

Joined: October 08, 2004

Location: United States

Posted: November 26, 2004 at 8:27 PM / IP Logged

And all of that means what? We told you what you need. A capacitor, batcap, or a high output alternator. Make sure you upgrade your cables from 12 guage to like 8 or 4 underneath the hood to have a strong electrical connection. No one said this would be cheap, but it will save you from shorting out everything and making your budget a lot more.

"I don't play games. I play Nakamichi and that for real yo" - Probably some japanese kid said this in the early 80's trying to sell stereo out of his trunk lol.

Back to Top

Search for other posts by uthinkuknoaudio

furflier

Copper - Posts: 236

Joined: June 14, 2004

Location: United States

Posted: November 26, 2004 at 8:29 PM / IP Logged

The amount of power you are running should not be that much of a strain on your electrical system. Check your battery cable connections make sure they are clean & tight. You might need to also have your alt tested.

Back to Top

Franco90

Copper - Posts: 48

Joined: February 23, 2004

Location: United States

Posted: November 26, 2004 at 8:34 PM / IP Logged

ok I have 1 Lightning Audio Strike LSD10-03

now so I connect hot wire to cap and then from Cap to amp ?

see this is when I get lost

Back to Top

supradude

Silver - Posts: 915

Joined: September 21, 2004

Location: South Carolina, United States

Posted: November 27, 2004 at 8:32 AM / IP Logged

Correct. Then just ground the cap to metal near it.

'85 Toy

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

lights dim

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.