Tach signal on 95 contour

Home / the12volt's Install Bay / Car Security and Convenience / Tach signal on 95 contour (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Eliseo

Member - Posts: 14

Joined: September 23, 2002

Location: United States

Posted: October 11, 2002 at 9:37 PM / IP Logged

I'm attempting to connect a remote starter on a 95 Ford Contour and a print out I have says to get a tach signal from WHITE/ black(2.0L) or BROWN / yellow on(2.5L) at Ignition Control Module (ICM).

My question is where is this (ICM) located and what does it look like? Am I goinig to have to tear apart this car to get to it? Also it says the Neutral safety switch is a BLACK / YELLOW wire at switch on driver side transaxle. What in the world is that, and where is it located.

Late, E. Mendez

Eliseo

Member - Posts: 14

Joined: September 23, 2002

Location: United States

Posted: October 14, 2002 at 11:36 PM / IP Logged

Can anybody tell me where to hook up the wire for Neutral safety switch on a 95 Ford Contour?

Late, E. Mendez

Ohmz

Copper - Posts: 193

Joined: May 09, 2002

Location: United States

Posted: October 14, 2002 at 11:38 PM / IP Logged

Is the car a stick shift? Did you find your tach yet?

Eliseo

Member - Posts: 14

Joined: September 23, 2002

Location: United States

Posted: October 16, 2002 at 10:07 PM / IP Logged

The car is not a stick shift. I was going to go with a tachless R/S. Is this a good idea? What I am worried about is the neutral safety switch. Any help is really appreciated.

Thanks,

Late, E. Mendez

Ickster40

Member - Posts: 32

Joined: October 01, 2002

Location: United States

Posted: October 16, 2002 at 10:37 PM / IP Logged

sometimes going tachlees you could lose the over rev shutdown feature- shuts the car off when the rpms get to high. the neutral safety switch is supposed to be wired to a switch in the parking brake.-- alot of people just hook it to ground. your remote start will still work that way also.

DJ,Scottsdale Extreme Sound

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Tach signal on 95 contour

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.