the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Second Opinion


Post ReplyPost New Topic
< Prev Topic Next Topic >
Ewaschuk 
Member - Posts: 5
Member spacespace
Joined: November 28, 2004
Location: Canada
Posted: November 28, 2004 at 3:11 AM / IP Logged  
Im am doing an install for my brother and he wants to throw in an Eclipse CD851 H/U, with an Alpine MRD-M500 Mono amp (500W RMS) to power 2 12" Eclipse SW7124DVC-T2 subs (450W RMS). I would wire the sub to a 2 Ohm load. But the main question i have is, would it just be better off to run 1 of the subs seeing how they will handle 450 W and the amp will put out 500W instead of using both. How i see it is the amp will only be able to power 1 sub fully.  Let me know what you guys think. Thanks.
If You Cant Hear It Before You See It, Whats The Point?
speedwayaudio1 
Silver - Posts: 879
Silver spacespace
Joined: March 18, 2003
Location: United States
Posted: November 28, 2004 at 3:28 AM / IP Logged  
If he already has both subs go ahead and use them. each sub will see 250w. it should sound pretty good.
Big Dave
Muffinman 
Member - Posts: 7
Member spacespace
Joined: September 09, 2004
Location: United States
Posted: November 28, 2004 at 11:04 AM / IP Logged  

You will do better to run just one DVC bridged 12". The M501 is a 4ohm Mono which when bridged will be 2ohms. This will work if the speaker is a 2+2.

I would rather have one great speaker working then two at half throttle.

audiobass10 
Silver - Posts: 328
Silver spacespace
Joined: October 11, 2004
Location: United States
Posted: November 28, 2004 at 2:45 PM / IP Logged  
Muffinman wrote:

You will do better to run just one DVC bridged 12". The M501 is a 4ohm Mono which when bridged will be 2ohms. This will work if the speaker is a 2+2.

I would rather have one great speaker working then two at half throttle.

Most subs can perform well with significantly less than the reccomended rms. Do yourself a favor and keep the 2 subs..purchase the JBL 600.1 off www.sounddomain.com for $160 and send each sub 300wrms...those amps put out the power they're suppose to..you can't go wrong with them.

Dave
Pioneer Premier DEH-P660
15" Kicker CVR
Profile AP1000M
It's Loud
Xracerx 
Member - Posts: 39
Member spacespace
Joined: November 28, 2004
Location: United States
Posted: November 28, 2004 at 5:30 PM / IP Logged  

He has a M500 Amp all ready. So why buy a new one? Just hook them both up and see how it sounds. Then try one speaker.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 30, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer