Voltages needed

Home / the12volt's Install Bay / Car Audio / Voltages needed (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

slasher

Member - Posts: 2

Joined: November 30, 2004

Posted: November 30, 2004 at 9:16 AM / IP Logged

I am trying to bench test my cd chnager from my car.

I need 12 volts and ground? any other voltages needed?

The power connector is a 9 pin din connector i think any help would be appreciated. The cd changer is stuck with cd's in there so I would like to get them out.

It is an Audiovox SP_10CDP changer

Back to Top

Xracerx

Member - Posts: 39

Joined: November 28, 2004

Location: United States

Posted: November 30, 2004 at 9:31 AM / IP Logged

There is a hole to put a paper clip in. This will open the deck and eject the CD's. You may need to look in the manual to see where they locate it.

All the unit needs to turn on is Power and a Ground

Back to Top

slasher

Member - Posts: 2

Joined: November 30, 2004

Posted: November 30, 2004 at 9:33 AM / IP Logged

I have the unit connected up wit h the 12v and the gnd.

It still will not power up or open or ANYTHING.

Thanks for the tip though

Back to Top

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: November 30, 2004 at 11:15 AM / IP Logged

you need to hook up two power wires. your constant and your ign. wire and your ground...

Quad L Handyman services

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Voltages needed

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.