the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

arctic shark remote starters


Post ReplyPost New Topic
< Prev Topic Next Topic >
Dauber 
Copper - Posts: 97
Copper spacespace
Joined: November 11, 2003
Location: Canada
Posted: December 06, 2004 at 10:40 PM / IP Logged  
How to program the remotes, since it is an obsolete system, does anybody know?
Kyle@Audio Obsession Sound
ck auto 
Copper - Posts: 257
Copper spacespace
Joined: September 20, 2003
Location: Canada
Posted: December 07, 2004 at 12:35 AM / IP Logged  

hi kyle arctic start is a brand distributed under r thibert in quebec it could be a compustar or auto start or just about any mainstream brand they just brand them under artic start you can get the new compustar 900mhz under the artic start badge

good luck
kirk
Dauber 
Copper - Posts: 97
Copper spacespace
Joined: November 11, 2003
Location: Canada
Posted: December 10, 2004 at 12:06 AM / IP Logged  

ck auto, Arctic Shark is the name of the car starter, it was manufactured by a company by the name of Scotia which was a big hit in Edmonton, AB(Canada) and now I have a customer that I have a new remote for it but programming is unlike any system I have seen before, so.....I hope someone out there can help me if they know the system at all, thanks anyways though ck auto.

Kyle@Audio Obsession Sound
budman1239 
Member - Posts: 14
Member spacespace
Joined: December 12, 2004
Location: Canada
Posted: December 14, 2004 at 1:16 PM / IP Logged  
Dauber, I also have a Scotia starter, that I need to re-program a remote. It's a Scotia Start 3000, Can anyone help!
Dauber 
Copper - Posts: 97
Copper spacespace
Joined: November 11, 2003
Location: Canada
Posted: December 16, 2004 at 12:06 AM / IP Logged  
budman 1239, I found a solution to my problems so hopefully this programming will help you;    pop the hood and make sure there is ground going through the hoodpin to the brain, there will be no parklight confirmation so just twist it a few times then go inside your car, turn the ignition on, off 4 times and on the 4th time leave in the on position, parklights should come on, the press the lock button on the remote, turn the ignition off, hold the hoodpin down and see what happens, let me know if this helps!
Kyle@Audio Obsession Sound
budman1239 
Member - Posts: 14
Member spacespace
Joined: December 12, 2004
Location: Canada
Posted: December 16, 2004 at 6:24 PM / IP Logged  

Dauber mine remote only has two buttons I and II, no lock/unlock, this is how I programmed mine,

          1. Open the Hood Pin Switch.

Before the 20 seconds have passed, turn the ignition key to the IGNITION ON (RUN) position and then to the OFF position.

  1. 2. Press and hold button É until the vehicle gives 5 flashes. The module has stored the transmitter in its memory.
  2. 3. Close the Hood, to exit.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer