trunk release for jetta 1995

Home / the12volt's Install Bay / Car Security and Convenience / trunk release for jetta 1995 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stereotornado

Member - Posts: 10

Joined: January 30, 2004

Location: Mexico

Posted: December 11, 2004 at 7:27 PM / IP Logged

l'm installing a viper 350 on a jetta 1995 and l want to install the trunk release, can somebody tell me the wiring diagram for it and the relay diagram if l needed. thanks.

Back to Top

furredoutgixxer

Member - Posts: 35

Joined: December 11, 2004

Location: United States

Posted: December 11, 2004 at 8:47 PM / IP Logged

its a grey wire at the back of the switch. you must isolate the switch from the release wire. to wire it you cut the wire, run the wire form the switch side to 87a of a relay. the other side of the wire goes to 30 connect 87 and 86 to 12 volt and 85 to the trunk release wire.

Back to Top

Search for other posts by furredoutgixxer

stereotornado

Member - Posts: 10

Joined: January 30, 2004

Location: Mexico

Posted: December 12, 2004 at 7:16 PM / IP Logged

thank you for help me

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trunk release for jetta 1995

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.