Ratchet driver

Home / the12volt's Install Bay / General Discussion / Ratchet driver (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: December 14, 2004 at 12:14 AM / IP Logged

I have a ratchet driver similar to this one.

But mine doesn't have the socket side only the bit side. I got mine from a cheap tools set about 10 years ago and mine is showing it's age. I have looked everywhere for one just like mine but I haven't been able to find one. This thing is great for when you have to take off speaker grills on the dash of cars that have no room betwen the dash and windshield.

Has anyone seen something like this out there? Any help will be really appreciated.

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: December 14, 2004 at 5:55 AM / IP Logged

I've seen these at sears and a few other local places.. The bit side only type. Also looks like there is some on ebay cheap.

http:///.com/dll?ViewItem&category=42337&item=3859215536&rd=1

http:///.com/dll?ViewItem&category=20769&item=4342779760&rd=1

Mike

Back to Top

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: December 14, 2004 at 10:47 AM / IP Logged

Thanks NowYaKnow !

But I'm looking for one like mine. Mine only has the bit side and the other side is completely flat which is what I like about it.

Back to Top

archemedes

Copper - Posts: 172

Joined: September 08, 2003

Location: United States

Posted: December 14, 2004 at 9:10 PM / IP Logged

have you tried harbor freight?

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: December 14, 2004 at 9:41 PM / IP Logged

A little closer...

http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00904116000

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90867

Mike

Back to Top

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: December 15, 2004 at 12:20 AM / IP Logged

Thanks everyone for your replies!

Mine is made by Master Craft I got it in a cheap Master Craft tool set from Fingerhut. I did check on their site(Master Craft) but they don't have all of their tools on the site. I'll try e-mailing them to see if they still make it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ratchet driver

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.