iva-d300 installed - gap?

This was my very first time installing a head unit of any kind, so I am pretty please with the fact that the head unit is entirely funcitonal.  It's a Christmas miracle!  However, the problem I have is that there is a gap of about 1/2" above the unit when the screen is retracted.  I also don't have the lower DIN with anything in it.  As far as the DIN-fillers, do I have to get a specific one to basically add a little holder?  And what do I do about the gap at the top?  Is there a kit I can get to help?  It's in a 97 Eclipse by the way.  Thanks for the help!

go to your local best buy or circuit city and get a dash kit for $20..thats all you need zack

sounds like you got the wrong dash kit.    Go back to where you got it and tell them its the wrong one, and have them look up a new one,   there is a metra guide on here that should give you the right code for the metra kit to get2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place