diamond hex blown?

Home / the12volt's Install Bay / Car Audio / diamond hex blown? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pbmswt69

Member - Posts: 8

Joined: October 24, 2004

Location: United States

Posted: December 23, 2004 at 11:40 AM / IP Logged

I had a set of hex speakers hooked up and they kept cutting in and out, then when I got home I took them out and one of the woofers, which was cutting in and out, wouldn't do anything, no sound, no popping, nothing. Do you think that it's blown? and is there any way to get a speaker repaired or would it be a waste? thnks

kfr01

Gold - Posts: 2,121

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 30, 2003

Posted: December 23, 2004 at 12:40 PM / IP Logged

Did you buy it from an authorized dealer?

New Project: 2003 Pathfinder

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 23, 2004 at 1:05 PM / IP Logged

I have heard of the terminals going bad on a few of these speakers look at the tinsel lead and see if it is solid and try touching your wires to it at a low volume to see if the woffer works

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

diamond hex blown?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.