new remote start questions

Home / the12volt's Install Bay / Car Security and Convenience / new remote start questions (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

My3rdBaby

Member - Posts: 8

Joined: December 16, 2004

Location: United States

Posted: December 23, 2004 at 3:12 PM / IP Logged

ive searched for this and couln't find anything. ive just about got everything hooked up but i was wanting to get some solutions for...

1. My heater/air conditioner won't work (the only thing i've found on this was somebody saying to join two wires in the ignition harness???) where is the wire that i hook up to for this?

and

2. There is a wire that sends a signal to the alarm when the car starts, the instructions say a wire that has negative polarity when the car is off, and positive polarity after the car has started. what is the easy and most common place to hook up this wire?

oh and by the way, the alarm i got was one of those generics off ebay

thanks

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: December 23, 2004 at 3:26 PM / IP Logged

dont join two wires together. use a relay to power up the other acc circuit. waht kind of car is it? is it an alamr and start combo or two seperate units?

My3rdBaby

Member - Posts: 8

Joined: December 16, 2004

Location: United States

Posted: December 23, 2004 at 3:30 PM / IP Logged

it's a alarm with starter combo

'89 honda prelude thanks for the reply

audifive

Copper - Posts: 89

Joined: June 02, 2004

Location: United States

Posted: December 23, 2004 at 3:30 PM / IP Logged

what kind of car is this for? many cars have more than one accessory wire that you must power in order to get the heater powered during a remote start. im not sure what you mean by the second question. what did you buy? a remote starter, or an all in 1 remote start/keyless/alarm?

My3rdBaby

Member - Posts: 8

Joined: December 16, 2004

Location: United States

Posted: December 23, 2004 at 3:34 PM / IP Logged

*also* there is a single wire that comes out of the main alarm module, which is in the same harness as the ignition wires, that is strictly supposed to be for the a/c and heater.

My3rdBaby

Member - Posts: 8

Joined: December 16, 2004

Location: United States

Posted: December 23, 2004 at 3:39 PM / IP Logged

My3rdBaby

Member - Posts: 8

Joined: December 16, 2004

Location: United States

Posted: December 23, 2004 at 3:42 PM / IP Logged

heres the diagram

my car is a 1989 honda prelude si

the wires i'm reffering to is the GREEN wire that is with the ignition harness and the PURPLE wire in the 5 P connector, at the top of the page thanks again for your help

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: December 23, 2004 at 3:46 PM / IP Logged

dont have time to help now, but if it can wait till late tonight or early tom. i will post some info for you. keep checking for other replies lots of good people on this site.

My3rdBaby

Member - Posts: 8

Joined: December 16, 2004

Location: United States

Posted: December 23, 2004 at 3:50 PM / IP Logged

thanks again

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: December 24, 2004 at 12:43 AM / IP Logged

the green wire should be conected to either the yellow or the white black wire at the ign harness. by the looks of the diagram it looks like both the green wire and brown wires are acc wires. i am not sure. i do not like the diagram that they give you. i am asleep as i write this so maybe i will be able to read better in the morning.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.