door locks after remote started

Home / the12volt's Install Bay / Car Security and Convenience / door locks after remote started (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

wblakes

Copper - Posts: 202

Joined: February 03, 2004

Location: United States

Posted: December 25, 2004 at 9:31 AM / IP Logged

i'm installing a viper 791 into a 1997 lexus es 300. to disarm the factory alarm you need to unlock doors. how do i relock the doors after the car is remote started. which wire do i use? thanks

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: December 25, 2004 at 9:43 AM / IP Logged

just hit lock after you RS. What about using the disarm defeat.

wblakes

Copper - Posts: 202

Joined: February 03, 2004

Location: United States

Posted: December 25, 2004 at 9:45 AM / IP Logged

i want it to relock automaticly. i'm still new to this i don't even know what disarm defeat is.

slicksam

Copper - Posts: 291

Joined: July 12, 2004

Location: Canada

Posted: December 25, 2004 at 10:05 AM / IP Logged

hey wblakes,

try this, sit in the car arm the ORIGINAL alarm system....wait 10 to 15 sec til the system is fully armed......then try starting the car by KEY. See if the alarm goes off....if it does....your remote starter should have the option of programming for unlock before start and lock after start and lock on shutdown

If it doesn't go off.....remove the option to unlock before start and leave everything as is.

as for this wire your looking for.....the door locks wires which you have connected already......the features for the doorlocks on the 791 can be changed to whatever you like.

I tried looking for your installation guide on your unit, but I couldn't find it

Testing is the key

wblakes

Copper - Posts: 202

Joined: February 03, 2004

Location: United States

Posted: December 25, 2004 at 10:09 AM / IP Logged

i know that the compustar alarms have the option of unlock before start and relock after start. the vipers do not have this option. i can started the car but just don't want the car to be unlock while it's running for the 12 minutes. will it work if i use the starter output wire and pulse the lock wire for it to lock the doors after it started?

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: December 25, 2004 at 10:12 AM / IP Logged

Also may could use your rear defforger set it to pulse this turns on 10 secs after the RS is on. Use relay though. Thsi may not be the best way to do it, just a thought. Never came across this before.

liinstaller

Member - Posts: 25

Joined: June 02, 2004

Location: New York, United States

Posted: December 25, 2004 at 5:42 PM / IP Logged

just use the ground out while running to the key sense wire and you will not have to unlock then relock the doors.

mobileworks

Copper - Posts: 136

Joined: December 16, 2004

Location: United States

Posted: December 25, 2004 at 7:03 PM / IP Logged

I would suggest using the key sense wire as well.

wblakes

Copper - Posts: 202

Joined: February 03, 2004

Location: United States

Posted: December 25, 2004 at 10:34 PM / IP Logged

anyone know what color is the keysense wire for this car?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 25, 2004 at 10:51 PM / IP Logged

RED / BLUE (-) at the ignition switch by the steering column.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.