Neutral Safety Switch

Home / the12volt's Install Bay / Car Security and Convenience / Neutral Safety Switch (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

realsynthetics

Member - Posts: 35

Joined: November 19, 2004

Location: United States

Posted: December 27, 2004 at 11:34 PM / IP Logged

I'm installing an alarm/starter combo on my car...and was wondering if its necessary to use the neutral safety feature... If its mandatory to tap into the wire for my starter's setup. Thanks for any help

-Duncan

Search for other posts by realsynthetics

rudef2

Member - Posts: 3

Joined: June 27, 2004

Location: United States

Posted: December 28, 2004 at 12:14 AM / IP Logged

It is mandatory to tap it if it is a standard/manual transmission car. An absolute must for safety sake.

if it is an automatic transmission you can just ground it in order for it to remote start. Only do this if you car will not crank while in gear. (most automatics dont, but just in case)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Neutral Safety Switch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.