Ultra Start 4500 Manual Tranny

Hey everybody I'm looking for some direction with this problem I'm having. My car is automatically arming once the engine is off. I've gone through the manual a few times, tried all the settings and things and still can't figure it out. I would go back to the place I got it and have them fix it, but it's an hour away! So if anyone has some advice I would greatly appreciate it!

Check your door triggers....alarms usually arm when last door is closed...with a time limit...maybe the alarm thinks the door is closed.. Ever try turning auto arm off? I'm not a pro, but figured I'd just give you my opinion.

Yea I've tried to find the auto arm and haven't found it in the book, most alarms arm when you arm them, I don't want it to arm on it's own that's y I'm looking for some advice, I'm hoping someone who is a dealer will respond.

OK here we go: within 3 seconds turn your ing key On-Off-On-Off-ON, press antenna button one time (lights will turn on), press button 1 on remote, press program button 5 times (the LED will flash 5 times) press and HOLD program button (you will hold the button until the lights flash and siren sounds 3 times then release) That will set the alarm to only activate when you do it from the remote

thanks alot...I knew there had to be a way but I couldn't find an installers manual on Ultra starts website and the shop I got it at didn't give me one. Thanks again!

thanks alot...I knew there had to be a way but I couldn't find an installers manual on Ultra starts website and the shop I got it at didn't give me one. Thanks again!

If you cant get it to work email me and I will give you my number and I will talk you through it toodarkmotorsports@yahoo.com