2003 Ext. cab fiberglass

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / 2003 Ext. cab fiberglass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

doc t

Copper - Posts: 169

Joined: April 11, 2004

Location: South Carolina, United States

Posted: February 17, 2005 at 6:20 PM / IP Logged

any more pics?

All Bleeding stops.....eventually!

Back to Top

Stanford1621

Copper - Posts: 53

Joined: December 23, 2004

Posted: February 26, 2005 at 7:08 PM / IP Logged

Can someone delete that post I don't know what happened to it

I am 99% done with the fiberglassing and there is not that much sanding to do,

I guess I found a trick I used very large pieces of mat that covered a whole side and cut it to fit that way there are no uneven places it stayed very uniform.

Instead of using small strips like paper machette.

2003 Ext. cab fiberglass - Page 5 - Last Post -- posted image.

Back to Top

Stanford1621

Copper - Posts: 53

Joined: December 23, 2004

Posted: February 26, 2005 at 7:10 PM / IP Logged

I have a gallon of rage gold I am not sure what my next step is once I am done sanding do I apply rage gold or do I use bondo to build out some of the low spots first? Then apply rage gold? Or is rage gold and bonde the same?

Back to Top

J1brew

Member - Posts: 12

Joined: July 02, 2004

Location: United States

Posted: February 27, 2005 at 1:45 AM / IP Logged

yes they sre both body fillers. and it is looking very good, i'm looking forward to seeing it finished.

keep the pics coming.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Ext. cab fiberglass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.