gain, eq, frequency

Home / the12volt's Install Bay / Car Audio / gain, eq, frequency (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cavyracer2003

Member - Posts: 39

Joined: July 22, 2004

Location: United States

Posted: December 31, 2004 at 12:46 PM / IP Logged

im trying to find the best setting for my gain, eq, and frequency.....i know that for gain you set the volume to the highest you would listen to it at and turn the gain up till it distorts and then turn it down a little.....now with my eq, and frequency settings on my amp do i do the same....also which order should i do them in....

Back to Top

dwarren

Platinum - Nominee - Posts: 1,811

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 03, 2004

Location: California, United States

Posted: December 31, 2004 at 1:18 PM / IP Logged

first off is this for subs? what amp is it? if it is for subs you will more than likely want to set your freq. at about 45, the eq kind of equates to more "boom" in the speakers, but this will make your amp run hotter though so use it sparingly.

Back to Top

cavyracer2003

Member - Posts: 39

Joined: July 22, 2004

Location: United States

Posted: December 31, 2004 at 1:38 PM / IP Logged

ya....its a 12" mtx 9500 hooked up to an mtx 1501d......

Back to Top

dwarren

Platinum - Nominee - Posts: 1,811

Joined: December 03, 2004

Location: California, United States

Posted: December 31, 2004 at 2:42 PM / IP Logged

Well most of info was quoted from the mtx guys, I am running a MTX 1000d, so its really similar, the freq. knob about half way , unless they put some markings... or call MTX they are pretty helpful.

Back to Top

cavyracer2003

Member - Posts: 39

Joined: July 22, 2004

Location: United States

Posted: December 31, 2004 at 3:13 PM / IP Logged

o thanks for the help

Back to Top

cavyracer2003

Member - Posts: 39

Joined: July 22, 2004

Location: United States

Posted: December 31, 2004 at 3:21 PM / IP Logged

damn i just called and they are closed....guess ill have to wait till monday

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

gain, eq, frequency

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.