make led flash

Home / the12volt's Install Bay / Car Security and Convenience / make led flash (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

satchmoe27

Member - Posts: 33

Joined: November 02, 2003

Location: United States

Posted: January 02, 2005 at 9:22 PM / IP Logged

I just bought some leds from streetglow. The leds do not blink. I want to use them to replace my old led on my alarm. Is there a way to make the new leds blink. Or will they blink automatically if I tap into my existing led wiring. And how can I tell if they are pulling to much current from my battery.

screamon deamon

Craig3708

Copper - Posts: 155

Joined: January 30, 2004

Location: Canada

Posted: January 02, 2005 at 9:25 PM / IP Logged

If your existing led used to blink, and you use the same connection the new led will blink. As for the amonut of current the led will draw, you would have to put alot of leds on your ride to affect your battery.....

Craig.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

make led flash

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.