oem honda door locks with remote start

Home / the12volt's Install Bay / Car Security and Convenience / oem honda door locks with remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tarasdad

Member - Posts: 19

Joined: January 03, 2005

Location: United States

Posted: January 03, 2005 at 8:17 PM / IP Logged

I know this question has probably been asked a hundred times before, but I installed a rattler 369d in my 02 odyssey. Everything works great, but I was wondering if there was a way to utilize the FACTORY key fob to lock\unlock the doors while it is remote started, as I know the factory rke doesnt work when the car is running.

Thanks in advance! This sight is awsome!!

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 03, 2005 at 8:23 PM / IP Logged

If from the factory the factory keyfob doesn't work with the car on, then the answer is no.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

tarasdad

Member - Posts: 19

Joined: January 03, 2005

Location: United States

Posted: January 03, 2005 at 8:31 PM / IP Logged

thanks for the quick response auex, i guess i will get used to the rattlers lock/unlock!

Never be too busy chopping wood to take time to sharpen your axe.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 03, 2005 at 11:12 PM / IP Logged

i think you can interrupt the keysense wire at the key cyl while RS. look at the non-data/synch harness. (-) when key put in.

iam fixin to test a RS add-on on an 01 CL and interrupt the keysense to make the OEM fob to be available when RS.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

tarasdad

Member - Posts: 19

Joined: January 03, 2005

Location: United States

Posted: January 04, 2005 at 7:40 PM / IP Logged

Hey, profuse007. I did try breaking the keysense wire, but down at the door lock module behind the glove. still no factory lock/unlock. I didnt want to use the keysense wire by the lock cylinder because it ties into the transponder bypass, but i couldnt imagine it making any difference.

any other ideas?

Never be too busy chopping wood to take time to sharpen your axe.

audifive

Copper - Posts: 89

Joined: June 02, 2004

Location: United States

Posted: January 04, 2005 at 10:08 PM / IP Logged

sometimes it has to do with the ignition or acc. wire seeing 12+, not keysense wire. maybe if the dorrlock module has an acc. hookup, you can break that connection. just a thought...good luck

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

oem honda door locks with remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.