2WFM-AS on 03' Accord ex

Home / the12volt's Install Bay / Car Security and Convenience / 2WFM-AS on 03' Accord ex (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ustankya

Member - Posts: 7

Joined: January 02, 2005

Location: United States

Posted: January 04, 2005 at 11:36 PM / IP Logged

i have a compustar 2wfm-as on my 2003 honda accord ex. every time i press the ( I ) on the remote to lock my door, it gives me additional 3 beeps showing me that the door is open on the remote. which is not. any idea what i mite of done wrong during the install???

and also, my car has remote trunk release, after i have installed my alarm, my truck wont open, not even with the factory remote. do i have to buy an additional device to open my trunk??

you experts out there, any suggestion???

-=(kAo)=-

Back to Top

Dhman

Member - Posts: 7

Joined: December 27, 2004

Location: Canada

Posted: January 05, 2005 at 12:41 AM / IP Logged

I'm not too sure about this but I think u have to hook a relay up for the trunk release. The (-200ma) output on the alarm should be hooked to a relay supplying +12v to the trunk release, on the 03+ accords the trunk release is a YELLOW /GREEN(+) wire and your output is (-) on the alarm system.

Can someone please confirm this??

Omar

Back to Top

secureauto

Copper - Posts: 196

Joined: January 02, 2003

Location: California, United States

Posted: January 05, 2005 at 1:19 AM / IP Logged

It is YELLOW /GREEN (+). If the trunk release doesn't work with the factory remote, you should check for a blown fuse.

ASE Certified

Back to Top

ustankya

Member - Posts: 7

Joined: January 02, 2005

Location: United States

Posted: January 05, 2005 at 6:20 PM / IP Logged

i checked the fuse, its not blown. and my factory remote wont open the truck after i installed the new alarm. any other suggestion? and does anyone know why my new remote beeps 3 times after i lock the door, sayin the my door is open??

-=(kAo)=-

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 05, 2005 at 6:27 PM / IP Logged

-so, does the trunk work w/ the new alarm on?

-you prolly grab the wrong wire.

check it w/ a DMM to be sure that its a door trigger.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

ustankya

Member - Posts: 7

Joined: January 02, 2005

Location: United States

Posted: January 05, 2005 at 6:52 PM / IP Logged

the truck wont open with the new alarm either

-=(kAo)=-

Back to Top

secureauto

Copper - Posts: 196

Joined: January 02, 2003

Location: California, United States

Posted: January 09, 2005 at 8:38 PM / IP Logged

Have you tested the wires at the trunk? Does the trunk release have an override switch at the trunk?

ASE Certified

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2WFM-AS on 03' Accord ex

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.