2000 Grand Cherokee Lock Help

I installed an Audiovox APS 685 remote start and a JDL-PK bypass with much help for this site. (thanks!) The remote starting is working and the doors will unlock but they won't lock. When I push the "lock" on the remote the horn beeps 3 times, no parking light flash and no door locking.    I have the red wire for the APS going to the green wire on the JDL. The APS red wire is a negative pulse for lock. For the unlock, which works, I have the APS green going to the JDL blue. I would think that if the neg pulse from the APS for the unlock works that the neg pulse for the lock should work too. Why would the horn sound 3 times? That sounds like an error code maybe? Any ideas? Thanks!

how did you wire it up....can you post the wiring info for the alarm???Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Here's a copy of the remote starter install instructions: http://www.stoneattic.com/1285861_IM.pdf and here's the JDL-PKs: http://www.bypasskit.com/Manuals/JDL-PK_0202_I_EN.PDF I have wired: APS (red) to JDL (green) - lock (doesn't work) APS (green) to JDL (blue) - unlock (works) APS (light blue) to JDL (brown) APS (white 1 of 2) to ground APS (white 2 of 2) to terminal 30 on the parkinglight relay JDL violet to pin #2 of OBDII JDL orange to horn I'm pretty sure I have the basic 12v and gounds correct. I didn't hook up violet/white, pink, pink/white on the JDL. I don't have the RED / black on the APS hooked up. JDL GREEN/ orange to injector

Something else I remembered. When hooking the battery back up the horn chirped 3 times just like it does when trying to lock the doors.

Anyone? Anyone? Bueller? Bueller?