the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Problems with the Viper 791XV


Post ReplyPost New Topic
< Prev Topic Next Topic >
DukeDuke 
Silver - Posts: 206
Silver spacespace
Joined: November 01, 2003
Location: United States
Posted: January 19, 2005 at 4:03 PM / IP Logged  
I believe it is connected onto a spark plug, there is a green and red or green and orange wire coming out of what looks like a spark plug on the drivers side of the engine. and the wire is connected to the other wire, not the green RED / green orange wire...
Duke Duke
DukeDuke 
Silver - Posts: 206
Silver spacespace
Joined: November 01, 2003
Location: United States
Posted: January 19, 2005 at 4:04 PM / IP Logged  
I am sorry, that sounded TOTALLY confusing, let me run outside and check...
Duke Duke
DukeDuke 
Silver - Posts: 206
Silver spacespace
Joined: November 01, 2003
Location: United States
Posted: January 19, 2005 at 4:07 PM / IP Logged  
there are 4 plugs on the engine block 1 then a space 1 then a big space, 1 then a space and 1... it is connected to the first plug(looks similar to a spark plug connection) there are 2 wires coming out of it, one that is green and orange and one that is white and blue, it is connected to the white and blue wire.
Duke Duke
DukeDuke 
Silver - Posts: 206
Silver spacespace
Joined: November 01, 2003
Location: United States
Posted: January 19, 2005 at 4:33 PM / IP Logged  
as well, the valet button is mounted to the bar under the knee panel, and it looks like the back of it has just melted for some reason
Duke Duke
DukeDuke 
Silver - Posts: 206
Silver spacespace
Joined: November 01, 2003
Location: United States
Posted: January 24, 2005 at 10:03 AM / IP Logged  
Just thought I would post this as well, and see if the alarm could be the cause of this problem as well, my battery in the truck will not stay charged, it seems to die after it has sat in the cold for about 24 hours or so. I am not sure if it is because the alarm is messing up, or because or something else. But, just thought I would throw that into the mix and see if maybe someone could come up with a solution and see if they could help me with it! Please let me know if you have any ideas or know what the cause of my problem is! Thanks!
Duke Duke
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer