auto security model imp-4040

Home / the12volt's Install Bay / Car Security and Convenience / auto security model imp-4040 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: January 12, 2005 at 10:16 PM / IP Logged

you have to install a pin switch in the engine bay then run your wire through the fire wall.use an existing wire grommet, saves time.

gcorrea

slyguy61520

Member - Posts: 9

Joined: December 30, 2004

Location: United States

Posted: January 13, 2005 at 6:38 AM / IP Logged

ok i can do that but i am wondering why it says hood pin or extra light switch +when brake is applied? thx

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: January 13, 2005 at 6:30 PM / IP Logged

maybe it can be programed to receive 12 volts or a ground input.something like a positive or a negavitve door trigger.

gcorrea

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

auto security model imp-4040

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.