door locks double pluse

Home / the12volt's Install Bay / Car Security and Convenience / door locks double pluse (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

bholz2004

Member - Posts: 9

Joined: December 03, 2004

Location: United States

Posted: January 12, 2005 at 7:44 PM / IP Logged

how can you make a single pulse from unit to a double pulse? (for nissan maxima) the unit i have only does double pulse on the unlock but i need a double pulse for the lock also. Any help would be great!

slicksam

Copper - Posts: 291

Joined: July 12, 2004

Location: Canada

Posted: January 12, 2005 at 8:25 PM / IP Logged

since when do you need a double lock.....I have never seen any remote starter do that.

the only thing you can program are the length of the pulse for the lock/unlock output.

p.s. maxima don't need a double lock....what are you trying to do?

Testing is the key

bholz2004

Member - Posts: 9

Joined: December 03, 2004

Location: United States

Posted: January 12, 2005 at 10:07 PM / IP Logged

1996 maxima needs a double pulse to lock and unlock

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: January 12, 2005 at 10:15 PM / IP Logged

late model maxima's and every infiniti product works on double pulse.. they also have driver's priority as well.

what alarm are you using ? You can use a pulse timer to give two pulses.. or, you can check this other posting in the relay forum here

bholz2004

Member - Posts: 9

Joined: December 03, 2004

Location: United States

Posted: January 13, 2005 at 6:24 AM / IP Logged

Im using audiovox 996c remote start alarm combo, it only has setting s for dbl pulse unlock

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: January 13, 2005 at 11:17 PM / IP Logged

A 1996 maxima only needs double pulse to unlock. A single pulse will lock. I've done 2 1996 maximas and a 1997. They all work the same.

slicksam

Copper - Posts: 291

Joined: July 12, 2004

Location: Canada

Posted: January 14, 2005 at 8:29 AM / IP Logged

Cutdog504...I tried telling them that, but they won't listen.

There is no way you need a double lock.

when you find the wire for lock(Light GREEN/ Red(-) in the driver door)..........close all doors and remove the key from the ignition, then test it

unlock = GREEN/ YELLOW (-) Double Pulse Unlock

You don't need double lock......never seen that in my 12 year expereince as an installer

Testing is the key

bholz2004

Member - Posts: 9

Joined: December 03, 2004

Location: United States

Posted: January 14, 2005 at 2:12 PM / IP Logged

Thats the wire I went to right in the door and it does need a double pulse to lock. When you push the power lock switch you can hear the keyless mod. click twice. I can get it to lock with a second pulse otherwise it wont lock. The made on date for the car is 11/95 but seems to be 96 by all the wiring.

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 14, 2005 at 3:08 PM / IP Logged

With the door open or closed..... with it open, yes, it probably needs two pulses to lock.... even the newer GM's won;t lock with one switchpulse. Closed..... then it should only need one pulse to lock. I have never ever needed 2 lock pulses in over 10 years.... trust me, if it was even remotely necessary, the units would have double lock pulses.

Gus

Wherever I go, that is where I end up......

bholz2004

Member - Posts: 9

Joined: December 03, 2004

Location: United States

Posted: January 14, 2005 at 4:14 PM / IP Logged

it was wit the door open, I'll have to try it again. Thanks

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.