2000 GP auto lock?

Home / the12volt's Install Bay / Car Security and Convenience / 2000 GP auto lock? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

homey88

Member - Posts: 42

Joined: January 04, 2005

Location: Minnesota, United States

Posted: January 21, 2005 at 1:58 AM / IP Logged

After i installed r/s the factory autolock isnt working, any ideas? i have to go back under to hook up the arm and disarm wire for the factory alarm, so what do i look for in regaurds to the autolock. The r/s has this feature but i want to know why the factory one isnt working anymore.

Brian

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: January 21, 2005 at 3:56 PM / IP Logged

Check your Shifter Switch (if you hooked up Neutral Safety) and your wiring again. The shifter switch sends a signal to BCM to Lock when taken out of Park.

Be sure you have no disconnected wires and that you used Negative Pulse for Door Locks

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 GP auto lock?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.