the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

How to wire alarm?


Post ReplyPost New Topic
< Prev Topic Next Topic >
zaho 
Member - Posts: 10
Member spacespace
Joined: December 21, 2004
Location: Slovenia
Posted: January 21, 2005 at 3:38 AM / IP Logged  

Hello!

I have an car alarm with only one output, it provides negative signal when armed and no signal when disarmed.

I'll like to install it in civic 99, so how to wire with one output  to door lock modul and 4 blinkers modul?

For door locks should i use simple relay with two outputs, which hold negat. pulse  one for lock and  other for unlock.

What about blinkers,do they need a negativ or pozitive signal to control the blinking ?

thanks for any infoHow to wire alarm? -- posted image.

regards, zaho

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 21, 2005 at 6:56 AM / IP Logged  

Your alarm has NO DOOR LOCK OUTPUTS.......?

What you have described is an out put for starter disable,not door locks. Ya sure your not missin something?

zaho 
Member - Posts: 10
Member spacespace
Joined: December 21, 2004
Location: Slovenia
Posted: January 21, 2005 at 7:11 AM / IP Logged  

Yes, i'm sure. About door lock i figure it out, i need relay which will provide negative puls on two different wires.

As for blinker i guess there is a big problem.

Still don't know --------> about blinkers,do they need a negativ or pozitive signal to control the blinking ?

bye

zaho 
Member - Posts: 10
Member spacespace
Joined: December 21, 2004
Location: Slovenia
Posted: January 23, 2005 at 7:18 AM / IP Logged  

alarm is bulldogsecurity model 3001, it's a stupid one.

 lock and unlock, is working.just have to put in a simple relay.But it was a big problem to get a wire from alarm to modul for locking/unlockin doors..

Now i have to do some electronic tfor blinkers. It have to menage neg.output to +12V, in pulse for lock 1sec long and unlock the puls should be 2sec long.

Does the hazard switch relay need negat. puls or pozitive pulse to work.?

thanx, bye

zaho 
Member - Posts: 10
Member spacespace
Joined: December 21, 2004
Location: Slovenia
Posted: January 23, 2005 at 3:24 PM / IP Logged  

bobk wrote:
Don't use hazard lights, use parking lights
   Why not blinkers?


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer