door pin on a 1999 Chevy Malibu

Home / the12volt's Install Bay / Car Security and Convenience / door pin on a 1999 Chevy Malibu (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gpgtp00

Copper - Posts: 81

Joined: April 11, 2002

Location: United States

Posted: April 27, 2002 at 2:26 PM / IP Logged

Whats up guys. Puttin an alarm on moms car now but the diagram i got off here only shows door pins for the 2 doors. Mom has a 4 door and also, all the triggers are individual. Am i gonna have to tie a trigger wire from each door into the 1 trigger wire for the alarm or is there one wire that i can tap into? Thanks ~Ed

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 27, 2002 at 2:33 PM / IP Logged

Chevrolet

Malibu

1997-2002

Remote Starter Wiring Colors and Notes
Function		Vehicle Color	Location
Start:		YELLOW	IGNITION SWITCH HARNESS *
Ignition #1:		PINK	IGNITION SWITCH HARNESS
Ignition #2:		DK. GREEN	IGNITION SWITCH HARNESS
Ignition #3:		N/A
Accessory:		ORANGE	IGNITION SWITCH HARNESS
Brake Light:		LT. BLUE	AT PLUG ABOVE BRAKE SWITCH
Tach Signal:		WHITE	AT ICM TOP REAR OF ENGINE
Parking Lights:		DK. BROWN (+)	AT HEADLIGHT SWITCH
Headlights:		DK. BLUE (-)	AT HEADLIGHT SWITCH
OEM Alarm Disarm:
OEM Alarm Arm:
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* This Vehicle Is Equipped With GM's PASSLOCK II Anti-Theft System

Chevrolet

Malibu

1997-2002

Alarm and Keyless Entry Wiring Colors and Notes
Function		Vehicle Color	Location
Constant +12 Volts:		Red	Ignition Switch Harness
Starter Kill:		YELLOW	IGNITION SWITCH HARNESS *
Ignition +12 Volts:		PINK	IGNITION SWITCH HARNESS
Dome Lights/Superv:		LT. GREEN/ BLACK (-)	OR LT. BLUE AT B.C.M **
OEM Horn:		BLACK (-)	AT STEERING COLUMN
Power Lock:		LT. BLUE	DRIVER'S KICK PANEL ***
Power Unlock:		WHITE	DRIVER'S KICK PANEL ***
Trunk Release:		BLACK (+)	AT TRUNK RELEASE SWITCH
Alarm Input Wire:		LT. GREEN/ BLACK (-)	OR LT. BLUE AT B.C.M **
Notes:	LT. GREEN/ BLACK (-) For Driver's Door Only & LT. BLUE (-) For ALL Other Doors. Diode Isolate With Cathode (Band) Facing OEM Wires. * Positive Pulse Door Lock

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

scss

Member - Posts: 25

Joined: April 29, 2002

Location: United States

Posted: April 30, 2002 at 12:37 AM / IP Logged

There are two door triggers

Driver Door only is (-) 18ga. GREEN/ black at drivers kick panel in black connector
Passenger doors (-) 18ga. Lt. Blue at driver's running board where harness "tees" and goes under driver seat. For coupes go to passenger's kick panel.
Dome light (-) 18ga. white at drivers kick panel in gray connecter. You can use this but it has a delay
Use diodes to isolate door triggers. Place doides inline with cathode (stripe side) away from alarm so neg. can come into alarm

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door pin on a 1999 Chevy Malibu

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.